55-CBSA-1.5X3.25X0.5

Series:	50-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.500" (12.70mm)
Length - Overall:	3.250" (82.55mm)
Width - Overall:	1.500" (38.10mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to RF Shields
RF Shields are a type of product used in a wide variety of applications to protect circuits from electromagnetic disturbances. They are often used to prevent interference with sensitive electronic components, and also to prevent the transmission of spurious interferers. They can be made from a variety of materials, ranging from standard sheet metals to more exotic materials such as conductive plastics.
The 55-CBSA-1.5X3.25X0.5 Shield
One example of an RF Shield is the 55-CBSA-1.5X3.25X0.5 model. This model is specifically designed for use in antenna applications, and is commonly used in consumer electronics such as cell phones and Wi-Fi devices. The 55-CBSA-1.5X3.25X0.5 contains a high-performance RF absorber material, as well as a high-frequency shield, which helps to reduce interference from outside sources. Additionally, the 55-CBSA-1.5X3.25X0.5 has a very low insertion loss, meaning that it does not significantly reduce the signal strength of the antenna.
Application Field and Working Principle
The 55-CBSA-1.5X3.25X0.5 shield is ideal for use in antenna applications where high performance is required. The shield is designed to absorb any incoming RF signals above a certain frequency, in order to prevent the signal from interfering with antenna performance. The shield also serves to limit interference from outside sources, allowing the antenna signal to remain relatively clear.
In order to achieve these benefits, the 55-CBSA-1.5X3.25X0.5 contains a high-performance RF absorber. The absorber material is made up of specially designed layers of conductive material, such as metal, conductive plastics, and other materials. These layers are arranged in such a way that they absorb any incoming RF signals above a certain frequency, while allowing lower frequency signals to pass through unimpeded. The absorber material also helps to reduce the amount of interference that is transmitted back from the antenna. Additionally, the 55-CBSA-1.5X3.25X0.5 contains a high frequency shield made from a combination of metal and conductive plastics. This shield serves to further reduce interference from outside sources while still allowing the antenna signal to be transmitted.
Conclusion
The 55-CBSA-1.5X3.25X0.5 is an effective and efficient RF shield for use in antenna applications. The shield contains a high-performance RF absorber material, as well as a high-frequency shield, which helps to reduce interference from outside sources. Additionally, the 55-CBSA-1.5X3.25X0.5 has a very low insertion loss, meaning that it does not significantly reduce the signal strength of the antenna. The shield is an invaluable tool for improving antenna signal quality and reducing the risk of interference from outside sources, while still allowing the antenna signal to be transmitted.

The specific data is subject to PDF, and the above content is for reference