550-80-084-10-031101 Allicdata Electronics
Allicdata Part #:

550-80-084-10-031101-ND

Manufacturer Part#:

550-80-084-10-031101

Price: $ 6.35
Product Category:

Connectors, Interconnects

Manufacturer: Preci-Dip
Short Description: PGA SOLDER TAIL
More Detail: N/A
DataSheet: 550-80-084-10-031101 datasheet550-80-084-10-031101 Datasheet/PDF
Quantity: 1000
63 +: $ 5.76900
Stock 1000Can Ship Immediately
$ 6.35
Specifications
Series: 550
Packaging: Bulk 
Part Status: Active
Type: PGA
Number of Positions or Pins (Grid): 84 (10 x 10)
Pitch - Mating: 0.100" (2.54mm)
Contact Finish - Mating: Tin
Contact Finish Thickness - Mating: --
Contact Material - Mating: Beryllium Copper
Mounting Type: Through Hole
Features: Open Frame
Termination: Solder
Pitch - Post: 0.100" (2.54mm)
Contact Finish - Post: Tin
Contact Finish Thickness - Post: --
Contact Material - Post: Brass
Housing Material: Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled
Operating Temperature: -55°C ~ 125°C
Termination Post Length: 0.164" (4.16mm)
Material Flammability Rating: UL94 V-0
Current Rating: 1A
Contact Resistance: 10 mOhm
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Sockets for ICs, Transistors

550-80-084-10-031101 are sockets commonly used for mounting transistors and Integrated Circuits (ICs) on printed circuit boards. This type of socket is designed to provide an electrical connection between a device and the board without using soldering, creating a sturdy and reliable connection that can easily be removed if needed. Here we will look at the application field and working principle of this type of socket.

Application Field

The application field for this type of socket is primarily related to Printed Circuit Board (PCB) assembly, making them a cost-effective alternative to soldering. They are often used to mount transistors and ICs on a PCB, providing electrical connectivity while allowing easy removal of components for testing or replacement. This type of socket can also be used for other components such as connectors or contact pins. A typical application field for 550-80-084-10-031101 is in consumer electronics, including electronic control boards for home entertainment systems and other household products.

Working Principle

The working principle of a 550-80-084-10-031101 socket is similar to that of a soldered connection. The socket has a number of contact pads, or “fingers”, that are connected to the PCB. When a transistor or IC is inserted into the socket, these contact pads make electrical contact with the component’s leads, providing a connection between the component and the board. The component is held in place by the socket’s retention clips, which provide tension to keep the component firmly in place. This ensures that the electrical connection between the component and the board is reliable and secure.

Benefits of Using Sockets for ICs and Transistors

The primary benefit of using a socket instead of soldering a transistor or IC to a PCB is that it is much easier to remove the component. This makes it possible to test components before they are soldered into place, as well as to easily replace a component that has failed. In addition, using a socket makes it easier to inspect the connection for defects or damage, and to make repairs or adjustments without having to remove and resolder the component. The socketless connection also creates a stronger bond than a soldered connection, and is less likely to be affected by vibration or other physical forces.

Drawbacks of Using Sockets for ICs and Transistors

As with any type of connection, using a socket for transistor and IC mounting also has some drawbacks. The most obvious is the extra cost associated with purchasing and installing sockets, as well as the added complexity of assembly. In addition, the retention clips used to keep the component in place can cause problems if they are too tight or too loose, resulting in a poor connection. Finally, using a socket provides less flexibility than soldering, as the component must be compatible with the socket in order for the connection to be made.

Conclusion

In conclusion, 550-80-084-10-031101 sockets provide an easy and reliable way of connecting transistors and ICs on printed circuit boards. They offer a cost-effective alternative to soldering, as well as the added benefit of being able to easily remove components for testing or replacement. However, due to their additional cost and complexity, as well as their lack of flexibility, it is important to consider all of the advantages and disadvantages before using this type of socket for component mounting.

The specific data is subject to PDF, and the above content is for reference

Latest Products
145-PGM15023-50

CONN SOCKET PGA GOLD

145-PGM15023-50 Allicdata Electronics
28-3553-10

CONN IC DIP SOCKET ZIF 28POS TIN

28-3553-10 Allicdata Electronics
D01-9933201

CONNECTOR

D01-9933201 Allicdata Electronics
1554116-1

CONN SOCKET LGA 1356LGA GOLD

1554116-1 Allicdata Electronics
105028-2011

CONN CAMERA SOCKET 32POS GOLD

105028-2011 Allicdata Electronics
9-1437508-5

CONN SOCKET TRANSIST TO-5 4POS

9-1437508-5 Allicdata Electronics