5500-153J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are used in a wide range of power and electronic circuits to provide inductance in a variety of applications. The most common fixed inductors for power applications are made up of ferrite cores and copper wire. Fixed inductors are used when a specific value of inductance has to be accurately controlled. The most common fixed inductors for electronic applications are made up of coils, springs, and capacitors. The 55-153J fixed inductor is an example of a power inductor used in many electronic applications.

The 55-153J is a medium-sized, fully enclosed, high-power fixed inductor with a nominal inductance of 22µH to 100µH and current rating of 1.2A to 1.4A. It is available in a number of configurations, including enclosed, air- or chamber-cooled, and externally mounted inductors. The most common form of this inductor is an enclosed rectangular shaped inductor with two wire terminals moulded into the case.

The primary application for the 55-153J fixed inductor is in switching mode power supplies (SMPSs) and Voltage Regulated Module (VRM) circuits, where the inductance must remain accurate and consistent over a wide range of input voltages. The 55-153J is also used in audio amplifiers, inverter circuits, motor drives, and high-frequency inverter circuits. This type of inductor is also found in a variety of consumer electronics and communication equipment.

The operating principle of a fixed inductor is that of an inductor coupled to two other inductors. The inductors form an LC resonance circuit which is used to store and release energy in the form of a magnetic field. When an alternating current is applied to the primary inductor, which is usually an air core or ferrite core, the current flows back and forth between the two other inductors, while producing a magnetic field. The energy stored in the magnetic field from the primary Inductance is transferred to the LC resonance circuit which is then used to drive an inductive load.

The two secondary inductors in the LC resonance circuit act as load coils and resonate with the primary inductor. As a result, the energy stored in the magnetic field of the primary inductor is transferred to the secondary inductors, and they act as current limiters, regulating the output current according to the input voltage. The magnetic field produced by the LC resonance is limited to the inductors\' specific inductance, which is determined by their size and the number of turns of wire used. The size of the primary inductor defines the maximum output current.

The 55-153J fixed inductor is a reliable and durable power inductor typically used in switching mode power supplies and Voltage Regulated Module (VRM) circuits. Its primary function is to provide a stable and accurate inductance over a wide range of input voltages. With its accurate inductance and high current rating, the 55-153J is suitable for a variety of applications, including consumer electronics, audio amplifiers, inverters, motor drives, and high-frequency inverters.

The specific data is subject to PDF, and the above content is for reference