550AC000134DGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: 550AC000134DGR Application Field and Working Principle

Oscillators are electronic circuits that produce a periodic signal. They are composed of active and passive elements. Oscillators are extremely important components of electronic systems, with a wide range of applications. In this article, we will discuss the application field and working principle of the 550AC000134DGR oscillators.

The 550AC000134DGR oscillators are typically used in high frequency, low power applications. These oscillators are incorporate a quartz crystal regulated oscillator circuit with low power CMOS logic to provide a low cost, clock rate of up to 25 MHz. The quartz crystal oscillator circuit within the oscillator is designed to provide precise frequency control and stability in electrical circuits requiring extremely accurate frequencies. These oscillators are quite popular in oscilloscope applications, where high accuracy and stability are required to measure signals accurately.

The working principle of the 550AC000134DGR oscillators is as follows. The oscillator consists of an active element, usually a bipolar transistor or a FET, and a quartz crystal. The active element is operated in a basic amplifier circuit. This amplifier circuit is connected to the quartz crystal, which provides the frequency stability.

The frequency of the oscillator is determined by the resonant frequency of the crystal. The crystal is connected to the amplifier circuit in such a way that it provided the positive feedback to the amplifier, resulting in an oscillatory circuit. The frequency of the oscillator depends on the load capacitance and the resonant frequency of the crystal. The oscillations created by this circuit are equal to the resonant frequency of the crystal, and it produces a periodic signal with a frequency determined by this frequency.

The output signal is then fed to a voltage controlled oscillator (VCO), which is used to further fine-tune the frequency of the oscillator. The VCO helps to make the signal more accurate as it can be adjusted over a wide frequency range. The output of the VCO is then fed to a low pass filter and a clock divider to divide the signal into lower frequency clocks.

The 550AC000134DGR oscillators are reliable and have low power consumption. They can provide a wide range of adjustable frequencies accurately, and are suitable for applications where precise control and stability of frequency is desired. Furthermore, they can be used for various applications such as frequency measurement, base station synchronization and timing circuits.

In conclusion, the 550AC000134DGR oscillators are reliable components with multiple applications. They incorporate a quartz crystal regulated oscillator circuit along with low-power CMOS logic, allowing them to achieve precise frequency control and stability. Furthermore, they can be used in oscilloscope applications where accuracy and stability are needed.

The specific data is subject to PDF, and the above content is for reference