550ND148M500DG

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	75mA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	108mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	±80ppm
Series:	Si550
Voltage - Supply:	3.3V
Output:	LVDS
Function:	Enable/Disable
Frequency:	148.5MHz
Type:	VCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Oscillators are devices that convert direct current to alternating current or create a steady stream of pulses. They are used in a variety of applications, such as radios, timers and measuring instruments. The 550ND148M500DG oscillator is a common type used in many applications. This article will discuss the application field and working principle of the 550ND148M500DG oscillator.

The 500DG 550ND148M is a ceramic oscillator commonly used in digital and analog circuits for timing and frequency generation. It is designed for use in consumer electronics, communications, and data acquisition systems. The oscillator has a wide operating temperature range of –40°C to +85°C, and can operate with both 5 and 12 volt supplies. It also has a frequency range of 22 kHz to 44 kHz, and can provide clock signals up to 40 MHz.

The 500DG 550ND148M oscillator can be used in a variety of applications. It can be used as a low-cost system clock in microcontroller-based systems, and as a time and frequency reference in complex applications. It can provide accurate clock signals for data acquisition applications and can be used for frequency synthesis in radio transmitters and receivers. In addition, it can be used for accurate timing signals in industrial control and automation systems.

The 500DG 550ND148M oscillator works by converting an alternating current into a steady pulse train. Its internal circuitry consists of integrated ICs, such as capacitors, inductors, and resistors. The oscillator converts the alternating current to a steady pulse using an oscillation control circuit. The circuit consists of an amplifier, a capacitor, and a resistor. As the voltage across the capacitor increases, the capacitor discharges, sending a voltage waveform to the amplifier. The voltage waveform is then amplified and sent to the output.

The 500DG 550ND148M oscillator has a wide range of applications and is reliable and stable. Its wide operating temperature range and high frequency output make it suitable for a variety of applications. It is a cost-effective solution for timing applications and can provide accurate clock signals for data acquisition and frequency synthesis. The oscillator also has a low power consumption, making it an ideal choice for battery-powered applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description