Allicdata Part #: | 374-1385-ND |
Manufacturer Part#: |
567-70-1-I |
Price: | $ 53.75 |
Product Category: | Isolators |
Manufacturer: | Standex-Meder Electronics |
Short Description: | OPTOISOLATOR 4KV TRANSISTOR |
More Detail: | Optoisolator Transistor Output 4000VDC 1 Channel |
DataSheet: | 567-70-1-I Datasheet/PDF |
Quantity: | 39 |
1 +: | $ 48.86280 |
10 +: | $ 46.28990 |
25 +: | $ 43.71820 |
50 +: | $ 41.14660 |
100 +: | $ 38.57490 |
Input Type: | DC |
Supplier Device Package: | -- |
Package / Case: | 5-DIP Module |
Mounting Type: | Through Hole |
Operating Temperature: | -20°C ~ 85°C |
Vce Saturation (Max): | -- |
Voltage - Forward (Vf) (Typ): | -- |
Current - Output / Channel: | 50mA |
Voltage - Output (Max): | 15V |
Output Type: | Transistor |
Series: | -- |
Rise / Fall Time (Typ): | -- |
Turn On / Turn Off Time (Typ): | 500ns, 500ns |
Current Transfer Ratio (Max): | -- |
Current Transfer Ratio (Min): | -- |
Voltage - Isolation: | 4000VDC |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are components designed to electrically isolate two sections of a circuit. By using optical communication, it is possible to pass signals from one side of the isolator to the other without establishing a direct electrical connection. This is of particular importance if two sections of a circuit are drawing from different power sources, as an electrical connection between the two could create a short circuit and cause component failure or even an electrical fire.
The 567-70-1-I is an optoisolator containing a transistor, photovoltaic output (TLP567-70-1-I). Its primary application is to optically couple an input signal to an output transistor, while the secondary application is to optically switch high power. The device operates over a wide input and output current range, making it ideally suited for a variety of applications such as household appliances, automatic control systems, and industrial safety controls.
The 567-70-1-I features a wide input current range, from 1-3 mA to 1-30 mA, low voltage drop, and low power dissipation. It also contains a built-in reverse connection protection circuit which helps prevent damage due to accidental connection of the input and output transistors.
The 567-70-1-I is designed to work with DC power sources, and it requires a minimum input of 1.5 V and a maximum of 5 V. Its output can handle a maximum of 150 V DC or 120 V AC. The device is available in a variety of package sizes, ranging from 5 x 5 mm to 8 x 8mm.
The 567-70-1-I is designed to be connected to an LED to provide optical coupling. When the input signal is applied to the LED, it is converted into a light signal and received by a photoloop. This signal is amplified and used to drive the output transistor. The output transistor can then be used to control a load, such as a motor or other equipment.
The 567-70-1-I is a great choice for applications that require electrical isolation while still providing a reliable signal transfer. Its wide input current range, low voltage drop, and reverse connection protection make it an ideal choice for many applications. Its small package size and low power dissipation make it ideal in space-constrained designs.
The specific data is subject to PDF, and the above content is for reference
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...