5680101333F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LEDs (Light Emitting Diode) are typically found on circuit boards, used as indicator lights, in arrays or light bars, or as bar graphs. The 5680101333F is among the most common of LEDs used on circuit boards and is often used as indicators. This article will discuss the applications and workings of this particular device.

5680101333F Application Field

The 5680101333F can be used in a wide range of applications. It is frequently used as an indicator to warn the user of low battery life, over temperature, short circuit, and other important system status. Additionally, this LED can be used as a power indicator, to indicate the system is powered on or off, whether a sensor is working correctly, system power status, or simply as decorative lighting for cosmetics purposes. Some other popular applications of the 5680101333F are in aerospace and automotive industry, gaming consoles, and medical equipment.

Working Principle

The 5680101333F is a standard LED. It is composed of an anode (+) and a cathode (-) plate, similar to two batteries connected in series. When power is applied from a current source, electrons from the negative plate flow to the positive plate, resulting in a current flow and the creation of light. Thus the more power applied to the LED, the brighter the light will be.

The 5680101333F has a standard 2.1V to 3.3V range and a maximum current load of 20 milliamps. It should be used with a resistor of typically 220-330 ohms to prevent overload, which can cause burnout or damage. In addition, an over-voltage or reverse-polarity protection circuit should be installed to protect the LED against sudden changes in the power supply voltage.

Conclusion

The 5680101333F is a commonly used LED that is highly versatile in terms of its applications. It can serve various purposes in terms of power status, warnings, and decorations. Its working principle revolves around a current flow between its two plates, resulting in the emission of light. Because of its lower power requirement, it should be used with a resistors and over-voltage/reverse-polarity protection.

The specific data is subject to PDF, and the above content is for reference