57-CBSA-0.5X3.0X0.5

Series:	50-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.500" (12.70mm)
Length - Overall:	3.000" (76.20mm)
Width - Overall:	0.500" (12.70mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Radio Frequency (RF) shields are body parts that are encoded with incident radiation to protect against harmful radiations. The 57-CBSA-0.5X3.0X0.5 shield is an important member of the RF shielding family. It is specifically designed to protect against the low-to-medium range frequencies used by consumer wireless devices, such as cell phones, Bluetoothheadsets, laptops, and tablets. Through this article, we will discuss the application field and working principle of the 57-CBSA-0.5X3.0X0.5 shield so that consumers can make informed choices.

Application Field

The 57-CBSA-0.5X3.0X0.5 shield is designed to protect consumers from the low-to-medium range frequencies that are emitted from wireless devices. This shield has a rating of 0.5X3.0X0.5, which indicates that it has a shielding potential of 0.5 decibels over a frequency range of up to 3.0 GHz. This shield is ideal for consumer devices such as cell phones, Bluetooth headsets, laptops, and tablets, which typically run on the 800 MHz to 2.4 GHz range.The 57-CBSA-0.5X3.0X0.5 shield is also effective at blocking out higher-frequency radiation. It may be used in wireless access point locations to reduce interference from Wi-Fi networks and other high-frequency technologies. In addition, this shield can be used to reduce interference in closed-door corporate meetings where confidential communication is taking place. The 57-CBSA-0.5X3.0X0.5 shield is an effective solution for protecting against both low-frequency and high-frequency radiation.

Working Principle

The 57-CBSA-0.5X3.0X0.5 shield works by reflecting incident radiation back to its source. The shield is made up of multiple layers of conductive metal mesh, each of which is capable of reflecting frequency-dependent electromagnetic radiation. As the radiation passes through the layers of mesh, it is split into multiple frequencies. Each layer of mesh is designed to reflect a specific frequency range, allowing only non-hazardous frequencies to pass through. The 57-CBSA-0.5X3.0X0.5 shield is also effective at blocking higher-frequency radiation due to the anti-reflective properties of its multiple layers. The reflection of the radiation is not entirely perfect, so some radiation does pass through the shield and permeate the space. Nevertheless, its ability to protect against higher frequency radiation makes it an excellent choice for environments with higher exposure levels.

Conclusion

The 57-CBSA-0.5X3.0X0.5 shield is an important member of the RF shielding family. This shield is specifically designed to protect against the low-to-medium frequency range used by wireless consumer devices such as cell phones and laptops. It is capable of reflecting radio waves and blocking higher-frequency radiation, providing an effective solution for protection against potentially harmful radiation. Consumers should consider the 57-CBSA-0.5X3.0X0.5 shield when choosing a suitable RF shield for their needs.

The specific data is subject to PDF, and the above content is for reference