57-CBSA-0.75X2.5X0.5

Series:	50-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.500" (12.70mm)
Length - Overall:	2.500" (63.50mm)
Width - Overall:	0.750" (19.05mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

RF Shields, RF Shielding, or Radio Frequency (RF) Shielding refers to techniques used to reduce the amount of radio signals in a certain area, or to separate sections of a building or enclosed space, such as a laboratory or data center, to prevent interference and leaks of radio signals. RF Shields are typically made out of conductive materials, such as copper, aluminum, nickel, or ferrite, to prevent or block out any radio frequency signals.A specialty type of RF Shield is the 57-CBSA-0.75X2.5X0.5 (or 57-CBSA-15), which is a conductive shielding box that is designed to block electromagnetic interference (EMI) and radio frequency (RF) interference from entering or leaving a particular space. This box, when installed in an area of equipment, eliminates RF and/or EMI interference.

Application Field and Working Principle

The 57-CBSA-0.75X2.5X0.5 (or 57-CBSA-15) RF Shield can be used in two major application areas:1. The industrial sector: This RF Shield can be used in industrial equipment to reduce the amount of RF interference caused by nearby equipment. This is an ideal solution for factories, medical equipment, and any other environment where different types of equipment are producing and using RF signals.2. The consumer sector: This RF Shield can also be used in consumer electronics, such as smartphones, laptops, and tablets. This will help reduce any unwanted RF or EMI interference and will provide a more stable network connection for these devices.RF Shields are typically installed in one of two different ways:1. Enclosure: In this method, the RF Shield is placed outside the equipment and the electrical components are placed inside it. This provides a physical barrier between the components and the environment, thus preventing any RF interference from entering or leaving the equipment.2. Circuit Board: In this method, the RF Shield is placed on the circuit board itself. This way, the RF shield intercepts and prevents any RF interference from entering or leaving the circuit board. This method is usually used in printed circuit boards, where space is limited and the components are very close together.The 57-CBSA-0.75X2.5X0.5 (or 57-CBSA-15) RF Shield provides shielding from both EMI and RF interference. This is achieved through the use of multiple layers, each one designed to absorb different frequencies. These layers are connected together and enclosed in a shielded box, which helps to further filter out any unwanted radio waves. The box also has built-in holes that can be used to connect the box to other equipment or wires, making it easier to install.

Conclusion

The 57-CBSA-0.75X2.5X0.5 (or 57-CBSA-15) RF Shield is a specialized RF Shielding box that is designed to block out EMI and RF interference from entering or leaving a particular space. It can be used in both the industrial and consumer sectors to reduce RF interference. The RF Shield is generally installed in one of two ways – through an enclosure or on a circuit board – and its multiple layers help to absorb different frequencies and filter out unwanted radio waves.

The specific data is subject to PDF, and the above content is for reference