57-CBSA-5.0X5.0X0.5

Series:	50-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.500" (12.70mm)
Length - Overall:	5.000" (127.00mm)
Width - Overall:	5.000" (127.00mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields are a type of protection device that is designed to protect electrical circuits from the interference caused by radio frequency (RF) emissions. The 57-CBSA-5.0X5.0X0.5 is a RF Shield designed to provide effective protection and also enable high performance communications between two devices.The 57-CBSA-5.0X5.0X0.5 is a single-layer RF shield with a 0.5mm thickness and a 5x5cm base area. It is made from aluminum and is designed to block RF signals, while at the same time allowing signals to pass through with minimal effect on the signal strength and integrity. The 57-CBSA-5.0X5.0X0.5 is designed for use on a wide range of devices ranging from mobile handsets to multiplexed radio systems.The primary application field for the 57-CBSA-5.0X5.0X0.5 RF Shield is to provide protection against electromagnetic interference (EMI) and radio frequency interference (RFI). The shield can be used to protect against both transmit and receive signals of various frequencies and power levels. In addition, the shield can also be used to protect against the electromagnetic pulse caused by a lightning strike.The working principle of the 57-CBSA-5.0X5.0X0.5 RF Shield is simple. The shield works by providing a barrier between the RF source and the device being protected. The shield works by reflecting the RF signals away from the device it is meant to protect, while at the same time allowing signals to pass through with minimal effect on the signal strength and integrity.The 57-CBSA-5.0X5.0X0.5 RF Shield is designed with a high degree of manufacturability in mind. The aluminum material used in the design ensures that the RF signals are well protected, without compromising the integrity of the device. The shield has also been designed to resist corrosion, which ensures that it can be used in the toughest of environments. In addition, it also complies with the international quality standards.The 57-CBSA-5.0X5.0X0.5 RF Shield is also designed to be highly cost effective. The design process has been optimized to ensure that the material costs are kept to a minimum, while the durability of the product is maintained. The high level of manufacturability and cost effectiveness makes the 57-CBSA-5.0X5.0X0.5 RF Shield a great choice for a wide range of applications.In conclusion, the 57-CBSA-5.0X5.0X0.5 RF Shield is a highly effective device designed to provide protection against electromagnetic interference (EMI) and radio frequency interference (RFI). The shield offers a high degree of manufacturability, cost effectiveness, and durability. The shield is designed to provide effective protection and also enable high performance communications between two devices.

The specific data is subject to PDF, and the above content is for reference