578R250CTT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are an integral part of many electronic circuits and systems. They can be used for both time-domain control of signals, as well as for generating frequency-dependent signals for clocking purposes. The 578R250CTT is one such oscillator designed for general purpose applications.

The 578R250CTT is a low-frequency, stable oscillator used to generate a stable, uniform, frequency-dependent signal. It is based on a common oscillator design, and is typically used in applications requiring a narrowband frequency range between 20Hz and 1000KHz. It features a symmetric, symmetrically biased voltage amplifier, usually consisting of two resistors and two capacitors, and a floating back-biasing transistor.

The design of the 578R250CTT oscillator is straightforward and simple and is based on the principles of inherent operational amplifying. This structure allows for a relatively low-power operation, with a maximum voltage of 0.2V being sufficient to deliver the required power output. This is made possible by the symmetric back-biasing design, which provides an effective load capacity of approximately 4mA. This scheme also ensures that the operating frequency is stable and independent of external temperature variations.

The oscillator can be operated using either a continuous-wave or a pulse-width modulated (PWM) signal, depending on the application. It uses an active amplifier stage to provide the signal with the required amplitude and frequency range. The oscillator is also designed to be adjustable, allowing for the fine-tuning of its total output power. This feature allows for a wider range of applications, making it suitable for various communication systems, instrumentation and medical devices.

The 578R250CTT oscillator is suitable for use in a wide range of applications, such as in frequency-hopping radios, modulation and demodulation circuits, GSM/GPRS and other communications systems, frequency synthesizers, and test and measurement equipment. Additionally, this type of oscillator is also used in data transmission systems and clock generators that require a highly stable, low-noise, low-power signal. It is also suitable for use in audio amplifiers, as a current-controlled oscillator, and as a frequency standard for servomotors.

The working principle of the 578R250CTT oscillator is based on the negative impedance of its amplifier stage. When a power supply is applied to the device, it starts to oscillate. This oscillatory effect is referred to as the negative impedence and is caused by the feedback circuit consisting of the resistors and capacitors. As the current gain of the amplifier increases, the oscillation frequency increases, resulting in an output signal with the required amplitude and frequency range.

The 578R250CTT oscillator is, therefore, a reliable, cost-effective solution for low-power applications with stable, uniform frequency-dependent signals. Its adjustable characteristics make it suitable for a wide variety of applications, ensuring that it remains an indispensable component of modern circuit designs.

The specific data is subject to PDF, and the above content is for reference