59075-2-V-03-C

The 59075-2-V-03-C is a Magnetic Sensor that belongs to a family of position, proximity, and speed related modules. It employs magnetic sensors to detect changes in a magnetic field -- such as the presence of a steel target -- and indicates the position or movement of the target. Common applications, include products such as, but not limited to, linear position sensors, proximity sensors, and speed sensors.

In terms of position sensing, a 59075-2-V-03-C module uses an AC voltage coupled with two magnetically sensitive reed switches wired in series. The AC voltage is induced in the reed switch leads when a magnetic field is applied in the “ON” state, breaking the AC voltage circuit. Alternatively, the switches remain in their “OFF” state when no magnetic field is applied. As such, the 59075-2-V-03-C module is able to detect the simple presence or absence of a magnetic field in the vicinity of the AC voltage lead.

The 59075-2-V-03-C module also employs a Hall effect sensor which uses transistors and resistors to detect the presence of a magnetic field. This type of sensors relies on the principle that when a current is applied to the transistor, the magnitude of the current changes in response to the strength of the magnetic field. This information is then transmitted via the resistors and used to indicate the position or speed of the target.

The 59075-2-V-03-C can be used in various applications such as door locks, automatic doors, and motion sensors among others. In the automotive industry, the 59075-2-V-03-C module can be used to detect the relative position of a car seat, allowing the control system to detect when a seat is in the forward and backward directions. It can also be used as a speed sensor to monitor the rotation of an engine. For security measures, the module can also be used as a door lock for electric doors.

Furthermore, the 59075-2-V-03-C module can be used to monitor the rotation of any mechanical device with a precision of up to 0.01 degree. This is achieved by combining the two sensing techniques -- AC voltage and Hall effect sensor. The AC voltage allows the module to detect the presence or absence of a magnetic field. The Hall effect sensor detects changes in a magnetic field and hence can monitor the speed of rotation. This technology can be used for detecting the precise position of any moving target.

In conclusion, the 59075-2-V-03-C module is used in various applications such as door locks, motion sensors, linear position sensors, proximity sensors, and speed sensors. Thanks to its dual sensing techniques, it provides an accurate detection of the relative position or speed of any moving target with a precision of up to 0.01 degree. Therefore, the 59075-2-V-03-C module is an efficient solution for a variety of applications.