590CD11M2896DG

Frequency Stability:	±7ppm
Current - Supply (Disable) (Max):	75mA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	90mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	Si590
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	11.2896MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic circuits that are designed to produce a steady signal. Typically, the signal is in the form of a sinusoidal waveform or a square waveform. These circuits are essential for providing a stable clock signal in many modern electronic projects. One example of an oscillator is the 590CD11M2896DG.

590CD11M2896DG Application Field

The 590CD11M2896DG is a precision full-wave oscillator designed for frequency control and synchronization applications. It is particularly well-suited for use in high-frequency, high-power applications. This oscillator can be used for tunable amplifiers and transceiver systems, as well as microwave oscillators and communications systems. Additionally, it is often used in audio frequency applications, such as low frequency music synthesizers and high fidelity audio systems.

590CD11M2896DG Working Principle

The working principle of the 590CD11M2896DG oscillator is based on a voltage-controlled full-wave oscillator (FCO) circuit. Its circuit primarily consists of a phase-locked loop (PLL) generator, a voltage-controlled oscillator (VCO), and a feedback voltage amplifier.The PLL generator creates a reference frequency signal that is used as the starting frequency for the oscillator. The VCO circuit then takes this reference signal and modulates it according to the voltage applied to it. This voltage-controlled modulation is done using a varactor diode, which conducts electricity better when more bias voltage is applied. The output of the VCO is then fed to a low-pass filter, which forms the feedback voltage amplifier. This amplifier is used to regulate the output of the VCO and provide stability to the oscillator\'s output.

Conclusion

The 590CD11M2896DG oscillator is a precision full-wave oscillator designed for frequency control and synchronization applications. It utilizes a voltage-controlled full-wave oscillator circuit consisting of a PLL generator, a VCO circuit, and a feedback voltage amplifier. This oscillator is extremely well-suited for use in high-frequency, high-power applications, and is often used in audio frequency applications as well.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description