5962-8767902PA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are isolation devices that use an infrared LED emitter and a photodetector to separate a low-voltage input from a high-voltage/high-current output, often a photovoltaic array. They are often used where strong electrical isolation is necessary, such as in medical equipment, clean rooms, automotive applications, industrial systems and data communication. One of the most common optoisolators is the 5962-8767902PA, which is a Transistor, Photovoltaic Output (TPO) isolation module with a 1.5kV breakdown voltage.

The 5962-8767902PA optoisolator has a high current transfer ratio of up to 400mA which allows it to be used in a wide range of applications. The reverse blocking voltage rating of 40V ensures that it will not be damaged in high voltage environments. The isolation voltage of the 5962-8767902PA is rated up to 1500Vrms which provides good protection against electrical shocks, surges or skip faults. The maximum reverse leakage current of the 5962-8767902PA is only 200μA which further increases the reliability of the device.

The 5962-8767902PA consists of an infrared LED light source and a photodiode detector. The infrared LED is driven by a low-voltage input signal and emits light. The light is then detected by the photodiode which generates a proportional current output. The output current is then used to drive a load such as a solenoid, motor or relay. This type of optoisolator provides electrical isolation between the input and the output circuits, helping protect circuits from impacting each other.

The performance of the 5962-8767902PA is dependent on the light spectrum emitted from the LED, the reverse blocking voltage, the isolation voltage, and the current transfer ratio. The light spectrum emitted from the LED should be designed to match the photodetector’s spectral response. This ensures that the photodetector is able to detect the light emitted from the LED. Additionally, it is important for the LED and photodetector to be matched in terms of their forward voltage and reverse leakage current ratings.

The 5962-8767902PA optoisolators are manufactured using advanced surface mount technology and are designed to withstand extreme temperature and moisture levels. The device also has an integrated ESD, EMI, and transient protection circuit which helps protect the device from electrostatic and electromagnetic interference. Additionally, the 5962-8767902PA is offered in a wide range of package sizes and configurations which make it an ideal solution for a variety of applications.

In conclusion, the 5962-8767902PA optoisolator is an ideal solution for isolation applications where strong electrical isolation is necessary. Its high current transfer ratio, reverse blocking voltage, and isolation voltage ratings make it an extremely reliable and robust device that can be used in a wide range of applications. Additionally, its advanced surface-mount technology, integrated protection circuitry, and wide range of package sizes and configurations make it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference