5962-8981001XA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators isolators are electrical devices that use light to provide electrical isolation between two parts of a circuit. The prefix "opto" is derived from the Greek word optikos ("of the eye"), referring to the study of optics, or loosely the science of light. A typical optoisolator, the 5962-8981001XA, is composed of a light source (emitter) and a photosensitive device (detector). In the 5962-8981001XA, the light source is an LED, while the detector is a photovoltaic (PV) output transistor.

The 5962-8981001XA is designed to provide electrical isolation between the input and output circuits, a key consideration when controlling high-voltage applications. By using a light-induced current instead of direct electrical connection, the 5962-8981001XA minimizes the chance of erroneous signals due to ground loops, combined with the need for only one ground connection. In addition, the optoisolator’s minimal power output requirements allows it to be used in battery powered or other low- current applications.

The 5962-8981001XA further features a high-voltage isolation rating of 1500V. This allows it to be used in high-voltage, high-power applications, as well as ordinary signal applications. Additionally, the optoisolator’s small form factor enables it to be used in space-constrained applications, such as where other optoisolators are too large or difficult to fit into the available area.

The 5962-8981001XA works in the following manner. The LED emits light, which is absorbed by the photovoltaic output transistor. This transistors then converts the absorbed light energy to electricity. The output signal of this circuit is proportional to the current flowing through the photovoltaic transistor. The current is regulated by the voltage applied to the LED, which is dependent on the power supply applied to the optoisolator.

The circuit design of the 5962-8981001XA further allows the use of high common-mode transient immunity, low output saturation, and low on-state resistance, making it suitable for use in a variety of applications, including motor control, switch control, and industrial automation.

The 5962-8981001XA is ideal for controlling high-voltage applications, due to its 1500V isolation rating, as well as its ability to provide low-current power, making it suitable for battery powered applications. The optoisolator’s small form factor also makes it ideal for use in applications with limited space provisions. In addition, the 5962-8981001XA offers high common-mode transient immunity, low output saturation, and low on-state resistance, making it suitable for use in a variety of applications, such as motor control, switch control, and industrial automation.

The specific data is subject to PDF, and the above content is for reference