5P49V5901B598NLGI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Clock/Timing - Clock Generators, PLLs, Frequency Synthesizers offer a wide variety of important applications in industry today. One such application is 5P49V5901B598NLGI8, a clock generator, Phase Locked Loop (PLL) frequency synthesizer IC.

This device from NXP Semiconductors, available in an 8-pin SOIC package, is a combination of an oscillator, a clock generator and a PLL frequency synthesizer. It can be used to generate any exact frequency from a source and can be programmed to reliably generate low jitter frequencies from 0.32 to 177 MHz. It includes an integrated precision oscillator, a comparator circuit, a voltage-controlled oscillator, and an internal PLL loop.

5P49V5901B598NLGI8 operates in the frequency range of 8 to 16 MHz, with a variable range of 248 to 177 MHz. The maximum frequency is factory set by the use of a ceramic filter on the oscillator output. It can be used to generate signals at in-phase (180°) and quadrature (90°) phases, making it suitable to be used in radio frequency applications.

The main applications of this device are tuning circuits, timing and triggering functions and clock regeneration. It is also suitable for environmental and temporal-integrity applications where accuracy and precision are of utmost importance. The 5P49V5901B598NLGI8 can provide low jitter frequency synthesis for digital signal processors, micro-controllers and digital signal transmitting systems.

The working principle of a 5P49V5901B598NLGI8 PLL frequency synthesizer is based on the phase locked loop (PLL) technology. The device receives an input signal from a highly accurate crystal oscillator and processes it using the voltage-controlled oscillator integrated circuit (VCO) and comparator module. The comparator circuit helps to maintain a constant frequency and the VCO module helps to regulate the frequency of the output signal.

The comparison circuit compares the phase and amplitude of the input signal with the phase and amplitude of the output frequency. If there is an error detected, the VCO module will adjust the amplitude and phase of the output frequency, thus keeping the frequency of the output signal in sync with the input signal. This creates a cycle of loop-back, letting the frequency of the output signal remain in accordance to the frequency of the source.

Apart from the basic features listed above, the features found on the 5P49V5901B598NLGI8 include programmable frequency output, controlled divider range, on board temperature compensation, and factory-programmed PLL synthesizers. Additionally, the device has an integrated low power reset input and output enable/disable control. The device also features a built-in RC oscillator for system applications, providing significant flexibility for the user.

Overall, the 5P49V5901B598NLGI8 frequency synthesizer offers a wide range of applications in the industry today. It can be used for frequency synthesis, clock regeneration and tuning circuits. Additionally, its small size, low jitter and robust design make it a suitable solution for any application requiring accurate frequency synthesis.

The specific data is subject to PDF, and the above content is for reference