6-31CPG-SNPB-16 RF/IF and RFID

RFI and EMI - Contacts, Fingerstock and Gaskets are among the necessary components of many electronic devices and systems. 6-31CPG-SNPB-16 is a type of connection contact designed by RFI and EMI which utilizes both solder and press-fit technology. This contact connection is particularly suited for use in commercial-grade products, where reliability and appearance are important. The 6-31CPG-SNPB-16 contact connection is designed to provide superior heat transfer, low signal resonance, and true contact force for enhanced electrical performance.

In the past, contact connections were either soldered or press fitted. Both of these methods had their drawbacks. Soldering can cause thermal creep and poor connection. On the other hand, press-fit connections require heavy tolerances, resulting in weak and unreliable connection. The 6-31CPG-SNPB-16 connection utilizes a combination of both solder and press-fit technology, which allows it to offer superior performance over traditional methods.

The 6-31CPG-SNPB-16 utilizes four concentric rings of pin contacts to provide a secure connection with excellent electrical conductivity. The outer ring of pins is soldered in place, while the inner three rings are press-fitted. This allows for reliable electrical connection and secure mechanical assembly. The outer pin ring has also been treated with a protective coating that provides an additional layer of protection against corrosion, moisture, and abrasion.

The 6-31CPG-SNPB-16 contact connection can be used in a variety of applications. It is ideal for high-frequency applications such as radio broadcasting and cellular telephones. It can also be used in control systems, where reliability and performance are of the utmost importance. The 6-31CPG-SNPB-16 connection can also be used in medical-grade products, where reliability is a must. Additionally, because of its press-fit technology, the 6-31CPG-SNPB-16 connection may be used in high-vibration environments.

To ensure consistent performance, the 6-31CPG-SNPB-16 connection must be properly installed. The solder ring must be pre-heated to 265°C (505°F) and held for 17 seconds. After soldering, the contact must be cooled for at least 40 seconds. The press-fitting process should be performed with a force of 30 pounds on each pin.

In addition to its superior electrical properties, 6-31CPG-SNPB-16 connection has an aesthetically pleasing appearance. The contact is available in several different finishes, including natural tin, nickel, and gold. This makes it suitable for use in a variety of devices, from routers and switches to consumer electronics.

The 6-31CPG-SNPB-16 is a reliable and efficient connection contact for use in commercial, medical, and high-frequency applications. Its combination of solder and press-fit technology makes it an ideal choice for applications where reliable and high-performance connections are needed. The 6-31CPG-SNPB-16 connection is available in several different finishes, making it suitable for a variety of applications. With proper installation, the 6-31CPG-SNPB-16 contact can provide reliable and aesthetically appealing connections.