6000-100K-RC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors are widely used in electrical engineering applications for the purpose of energy storage or signal filtering. There are many different types and sizes of fixed inductors available for various applications, all using the same general principles. These include the 6000-100K-RC application field and working principle.

6000-100K-RC Application Field

The 6000-100K-RC application field, like all fixed inductors, uses the principles of resistance and capacitance to store energy in a closed circuit. The RC configuration consists of two parts, the inductor and the capacitor. The inductor, usually a coil or a coil of wire, is the component that is used to store energy. The capacitive element stores the energy, allowing it to be released at a later time when needed. In this application, the inductor is usually connected to the capacitor using a circuit board that has a small track mounted on it.

The 6000-100K-RC application field is mainly used in power conversion applications such as for battery charging, power supply regulation, and in audio frequency filtering applications. Fixed inductors with this application field are commonly used with radio frequency oscillators, high voltage rectifiers, high voltage AC/DC power supplies, power supplies for computer peripheral equipment, and low voltage DC converters. In all these applications, the inductor acts as a buffer between the power source and the output load.

6000-100K-RC Working Principle

The working principle of fixed inductors with the 6000-100K-RC application field is based on the two components, the inductor and the capacitor. The purpose of the inductor is to store energy, while the capacitor is used to release the energy when needed. In the RC configuration, the inductor has a certain value of inductance and the capacitor has a certain value of capacitance. The two values combined determine the amount of energy that can be stored and released.

The working principle of the 6000-100K-RC application field relies on the relationship between the inductor and the capacitor. When the capacitor is discharged, energy is stored in the inductor. As the capacitor begins to charge, it will release some of the stored energy back into the load, thus restoring normal operating conditions. This process can be repeated as long as the source of power remains connected to the circuit board.

Fixed inductors with the 6000-100K-RC application field are used in many different applications such as power conversion, radio frequency oscillators, high voltage rectifiers, high voltage AC/DC power supplies, power supplies for computer peripheral equipment, and low voltage DC converters. The working principle in these applications is based on the inductor and the capacitor combination allowing energy to be released when needed.

The specific data is subject to PDF, and the above content is for reference