60130265200

Series:	har-mik®
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Connector Style:	Center Strip Contacts
Moisture Sensitivity Level (MSL):	--
Connector Type:	Plug
Number of Positions:	26
Number of Rows:	2
Mounting Type:	Free Hanging (In-Line)
Termination:	IDC
Flange Feature:	--
Type:	SCSI
Features:	--
Contact Finish:	Gold
Contact Finish Thickness:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to D-Shaped Connectors - Centronics

D-shaped connectors, commonly known as Centronics connectors, are one of the most widely used type of connectors in the world. They are used in a variety of applications ranging from data communications and network communications to power, lighting and control systems.

Application Field of 60130265200

The 60130265200 is a Centronics connector which is a 35-pin interface connector that is predominantly used in printers and other peripheral devices. It was introduced by the Centronics Corporation in 1970s. As a result of its wide usage in printers and other peripherals, the 60130265200 Centronics connector is now widely recognized as the IEEE1284 standard interface.The 60130265200 Centronics connector has a range of pin-outs that depend on the exact application. However, in general, pins 1-13 are dedicated to data and pins 14-26 are reserved for control signals. The data lines themselves are divided into four different sections - Control (pins 1-3), Data (pins 4-7), Reset (pins 8-13) and Handshake (pins 14-17). The remaining pins are used for various different peripheral signals, such as sense lines, power, ground and select.

Working Principle

The working principle of the 60130265200 Centronics connector is fairly simple. The connector has two female terminals which plugs into the mating male Centronics connector. Once mated, the pins on the male connector align with the corresponding pins on the female connector.The connectors make use of two types of electrical connections - parallel and serial. A parallel connection occurs when two pins on the female connector make contact with two pins on the male connector at the same time. For example, when pins 4 and 5 on the female connector make contact with pins 12 and 13 on the male connector, this is known as a parallel connection. On the other hand, a serial connection occurs when a single pin on the female connector makes contact with a pin on the male connector.Once the connections have been made, the “flow” of data between the two connectors begins. Data is transferred from the male connector to the female connector via electrical impulses which travel down the pins of the male connector and into the female connector. The data is then routed towards its intended destination via different paths depending on the type of connection established.

Conclusion

In conclusion, the 60130265200 Centronics connector is widely used in the world. It is a 35-pin interface connector that is predominantly used in printers and other peripheral devices and is now recognized as the IEEE1284 standard interface. The working principle of the Centronics connector involves two types of electrical connections - parallel and serial - where data is transferred from the male connector into the female connector.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description