6116527-1

Series:	--
Packaging:	Tray
Part Status:	Active
Connector Type:	Jack
Number of Positions/Contacts:	8p8c (RJ45, Ethernet)
Number of Ports:	4
Number of Rows:	1
Mounting Type:	Through Hole
Orientation:	90° Angle (Right)
Termination:	Solder
Shielding:	Shielded
Ratings:	Cat5
Features:	Board Guide
LED Color:	Does Not Contain LED
Ingress Protection:	--
Tab Direction:	Down
Contact Material:	Phosphor Bronze
Contact Finish:	Gold
Contact Finish Thickness:	50.0µin (1.27µm)
Housing Material:	Polyamide (PA), Nylon
Operating Temperature:	-40°C ~ 85°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Modular Connectors - Jacks: 6116527-1 Application Field and Working PrincipleModular Connectors – Jacks are a type of telecommunications connector typically used with analog telephone sets or data networks. They are also referred to as modular plugs, RJ11 plugs, and RJ-11 jacks. The term 6116527-1 refers to a specific type of Jacks or plugs. This article discusses the application field and working principle of this specific connector. Application FieldThe 6116527-1 Jacks are primarily used in telecommunications. They are commonly used with analog telephone sets but can also be used with various types of data networks and communications interfaces. The most common application of the 6116527-1 jacks is in dial-up modems, which require a four-wire configuration for communication. This type of modular connector can also be used with certain types of data networks such as Ethernet. It can also be used with Voice Over IP (VoIP) and telephone sets that use Line-of-sight or Base stations networks.The 6116527-1 jacks are also suitable for both local and remote applications. This makes them very versatile and useful for applications that require a range of communications services and flexibility.Working PrincipleThe 6116527-1 Jacks follows a four-pair cable design. This allows it to provide a higher transmission rate than the standard two-pair design. The 6116527-1 jacks have a four-pin design and a two-prong connector. The four pins are separated by a plastic insulator, which helps to keep the electrical signals from interfering with each other. This makes it easier to route the signals in different directions. The 6116527-1 jacks are typically rated for up to 200MHz. This means that they have a high data rate and can handle large amounts of data. This is especially beneficial for applications that need to transfer large amounts of data or multiple audio signals at once. The 6116527-1 jacks also feature a modular interface. This allows the user to connect the plugs to different jacks or multiple connected devices to expand their networking capabilities. It also makes it easy to reconfigure and add a new connection type without having to buy a new plug or cable. The 6116527-1 jacks are typically made of either ABS or polycarbonate plastic. This ensures the connectors are able to withstand the wear and tear of daily usage, and also makes them highly durable. In summary, the 6116527-1 connector is a type of telecommunications connector typically used with analog telephone sets, dial-up modems, data networks, VoIP, and other communications devices. It is rated for up to 200MHz and has a four-pin design and two-prong connector. It is also modular in nature, allowing the user to connect the plugs to different jacks or multiple connected devices to expand their networking capabilities. It is made of either ABS or polycarbonate plastic to ensure a highly durable connection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description