Allicdata Part #: | 62-PMB-050-5-11-ND |
Manufacturer Part#: |
62-PMB-050-5-11 |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | API Technologies Corp |
Short Description: | LINE FILTER 250VAC 5A CHASS MNT |
More Detail: | N/A |
DataSheet: | 62-PMB-050-5-11 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | 62-PMB |
Part Status: | Discontinued at Digi-Key |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | -- |
Voltage - Rated AC: | 250V |
Current: | 5A |
Frequency - Operating: | 50/60Hz |
Applications: | General Purpose |
Approvals: | CSA, TUV, UR |
Operating Temperature: | -25°C ~ 85°C |
Mounting Type: | Chassis Mount |
Termination Style: | Threaded Post (M4) |
Inductance: | 14mH |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules, such as the 62-PMB-050-5-11, provide a very important service in the power distribution system of a modern industrial facility. By essentially acting as a filter, these modules are designed to help reduce both conducted and radiated emissions from the electrical system, thereby increasing the overall reliability of the systems and reducing the vulnerability of any equipment in the facility to outside interference. While the specifics of the modules may vary by manufacturer, they generally work in similar ways.
The 62-PMB-050-5-11 is an EMI power line filter module designed to block higher frequency signals while passing lower frequency power signals. In doing so, it prevents interference between the mains power and the other signals present on the power line. This interference can come in various forms, from the common Light Emitting Diode (LED) interference caused by digital displays to up-link radiation from computers or sensors connected to the power system. The 62-PMB-050-5-11 module is particularly well-suited to protecting low level signals.
The module employs an integrated common mode filter, which is composed of several components. These components, including capacitors, inductors, and resistors, create a low-pass filter that rejects high frequency noise while allowing lower frequency signals to pass through. This type of filter works by creating a cutoff frequency, which is the frequency at which signals are attenuated (or slowed down) significantly. Any signals above this cutoff frequency are blocked, while lower frequency signals pass through with minimal interference.
The 62-PMB-050-5-11 also has two coupled common mode inductors for proper filtering. These inductors are employed to reduce noise by providing additional shielding, which essentially cancels out unwanted signals. When they are properly installed on the mains, these inductors help ensure that only signals that are within the desired frequency range are allowed to pass through the filter module.
The 62-PMB-050-5-11 is widely used in both industrial and consumer applications. In industrial applications, it is used to protect delicate equipment from potential damage caused by electrical disturbances. This includes both conducted disturbances, which are caused by signals traveling through the power lines, and radiated disturbances, which arise from signals radiating from the power lines. In consumer applications, the module is also used to ensure a consistent power supply to sensitive electronics.
The 62-PMB-050-5-11 is an invaluable tool for maintaining the reliability and integrity of an electrical system. Its ability to reduce conducted and radiated interference makes it an essential part of any industrial or consumer power distribution system. It is also an important part of the effort to protect expensive and sensitive equipment from potentially deadly electrical interference.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT