62-PMB-100-5-12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules (62-PMB-100-5-12) are designed to manage line filter noise in the power systems. They are mainly used to reduce the amount of noise generated by high-powered electrical appliances. In addition, these filter modules can be used to reduce harmonics which can cause overloads or limit protection cascading.

Power Line Filter Modules (62-PMB-100-5-12) are designed with two components – the shield and the capacitor. The shield is used to protect against noise current. It is typically made from aluminum and copper strips, which are wound in concentric coils. The capacitor is designed to reduce the amount of signal or harmonics that are transmitted from one part of the system to another.

These Power Line Filter Modules (62-PMB-100-5-12) are typically used in a variety of applications, including: controlling noise of active components in electrical devices, blocking signal interference between systems, and noise reduction in aircraft systems.

The working principle of Power Line Filter Modules is based on four basic techniques. The first technique is the use of the filter components that are interconnected in the form of a shield and capacitor. The shield is designed to prevent the current flow from one component to another, while the capacitor helps to reduce the amount of signal which passes through each component. The second technique is using an inductive filter. This type of filter provides the highest degree of filtering and can be used to reduce a wide range of noise, from electrical to RF.

The third technique is using an active filter. This type of filter uses an active component such as a germanium diode in order to reduce noise. Active filters are capable of filtering both high and low frequency noise and can be used for a variety of applications, including noise suppression and bypass for audio equipment.

The fourth technique is the use of an interconnection between power line components. Interconnects are used to create a common ground for the powered components within a system. Interconnects are designed to reduce the level of noise between components, providing a cleaner signal.

Power Line Filter Modules (62-PMB-100-5-12) are effective solutions for providing clean power and reducing electrical noise in the power systems. They are used in a wide variety of applications and can be used to reduce harmonics, block noise between systems, and reduce noise of active components in electrical devices.

The specific data is subject to PDF, and the above content is for reference