62S18-M5-040C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoder is an important device used for measuring linear and rotary movement. It senses the position and speed of the rotating axle and produces an analog or digital signal proportional to its position and speed. 62S18-M5-040C is a type of encoder that can provide reliable and accurate feedback for motor control, speed detection and positioning applications.

62S18-M5-040C is a versatile encoder, improved from the previous generation of encoders. It is designed with an 18-bit resolution (400,000 counts/revolution), a 30-mm flange diameter, an IP65 protection degree against dust and water, and a 5 V and 10 V supply voltage options. It has a wide range of available electrical interfaces, including incremental I/O, CANopen and Synchronous Serial Interfaces (SSI), making it suitable for a variety of industrial applications.

The 62S18-M5-040C encoder is commonly used in the automation and robotics industry for its reliable performance and wide range of applications. It is typically used for servo motors control, speed and positioning measurement, robotic arm positioning control, and other industrial and automotive applications. The encoder is also designed for harsh environments and can be used in high temperature, dusty or wet conditions. Moreover, it can be used in a variety of workflows with different resolutions.

The working principle of the 62S18-M5-040C encoder is based on the mechanical-to-electrical conversion using optical and magnetic encoding methods. Firstly, the rotation of the axle is measured by a code disk, which is made of clear and opaque parts. Light-emitting diodes (LEDs) and detectors (photodiodes) are used to send a signal between these two parts. The signal changes its properties due to the displacement and then converted to an analog or digital signal.

In addition, the encoder features an internal Hall-effect sensor which is used to measure the position and speed of the axle. This sensor, together with the optical and magnetic encoding principles, are used to measure not only the angle and speed of the axle, but also the acceleration and deceleration of the moving axle. This provides a highly accurate measurement and feedback.

The 62S18-M5-040C encoder is mainly used for applications such as servo motor control, robotics, automotive positioning control, speed, and positioning measurement. It is highly reliable and accurate, can be used in a wide variety of industrial applications, and performs well in harsh environments. Its working principle is based on the mechanical-to-electrical conversion using optical and magnetic encoding methods, combined with an internal Hall-effect sensor.

The specific data is subject to PDF, and the above content is for reference