633E148A5I2T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An oscillator is an electronic circuit used to generate a periodic, oscillating electronic signal, often a sine wave or a square wave. An oscillator circuit uses an amplifier and a frequency-determining element such as a resistor, capacitor or inductor to create a phase shift between the output and the input waveforms. These phase shifts are necessary for oscillators to function properly.

A 633E148A5I2T oscillator is an example of a type of oscillator that is used within a wide range of applications and fields. This oscillator is designed with an integrated circuit, and offers very reliable performance. It is typically used for applications that require precise timing, such as clock generators, clock dividers, voltage-controlled oscillators, phase-locked loops, frequency discriminators, and so on.

The 633E148A5I2T oscillator is based on pulse-width modulation (PWM) architecture. PWM architecture starts from a basic single-stage amplifier, and uses a series of logic gates to control the output of the amplifier. This allows for the generation of waveforms with different frequencies, amplitudes, and shapes depending on the input values of the amplifier’s parameters.

The 633E148A5I2T uses a charge-pump phase-lock loop (PLL) topology for frequency control. In this topology, the oscillator’s frequency is determined based on two components, namely a voltage-controlled oscillator (VCO) and a frequency divider. The VCO output is controlled by an input voltage that is typically applied from an external source. On the other hand, the frequency divider is used to divide the frequency of the oscillator output by a certain number. This number is determined by the ratio between the PLL feedback capacitor and the PLL reference capacitor.

In order to achieve stable operation and consistent performance, the capacitances of the circuitry must be carefully selected and properly tuned. In addition, the PLL design also requires an external crystal to provide the reference clock signal. The crystal must have good frequency accuracy and stability in order to ensure the long-term accuracy and reliability of the oscillator.

The 633E148A5I2T provides an excellent frequency control range and low phase noise characteristics. It also offers excellent temperature performance, and can be used in a wide range of frequencies. The 633E148A5I2T is well-suited for use in clock-generators, frequency synthesizers, signal dividers, voltage-controlled waveform generators, phase-locked loops, frequency discriminators, and so on.

The specific data is subject to PDF, and the above content is for reference