653L20005C3T

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	66mA
Operating Temperature:	-20°C ~ 70°C
Series:	653
Voltage - Supply:	3.3V
Output:	LVDS
Function:	Enable/Disable
Frequency:	200MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: 653L20005C3T Application Field and Working Principle

Oscillators are electrical circuit components that generate a periodic electrical signal, typically in the form of a sine wave, with or without noise and distortion. Oscillators have many applications, such as stabilising the output of filter circuits, radio frequencies (RF), frequency synthesising, and in reducing jitter in microprocessors.The 653L20005C3T oscillator is an electronic oscillator designed for use in a variety of electronic equipment. The most popular application of this oscillator is in the timing circuits of microprocessors. In this application, the 653L20005C3T is responsible for generating a recurring clock signal used to control the timing of instructions and operations executed by the processor. This oscillator provides frequency stability and accuracy over temperature and output voltage variations.The 653L20005C3T oscillator employs a quartz crystal resonator as its resonant circuit element. The quartz oscillator is surrounded by a tightly sealed high-precision quartz crystal resonator that is sealed inside the oscillator package. The crystal resonator is placed inside the oscillator package so that it is not affected by environmental and electromagnetic interference.The 653L20005C3T oscillator uses the same fundamental design principles as most other quartz oscillators, but with a few refinements to improve its variants performance. This oscillator operates by using the piezoelectric property of quartz, where when an electric field is applied to the quartz, it causes a mechanical strain which creates an oscillation. The frequency of this oscillation is dependent on the mass and resonance frequency of the quartz crystal.To generate the signal, the 653L20005C3T oscillator employs two electrodes, a positive and negative, connected to a quartz resonator. When the quartz resonator is subjected to an electric field, it operates as a capacitive-inductive transducer, generating resonant oscillations in the quartz crystal at a frequency that depends on the crystal\'s mass and the resonant frequency of the crystal. Since quartz crystals have a very high frequency accuracy, the oscillator can precisely reproduce the frequency of the signal.The oscillator then amplifies the oscillation to produce the appropriate signal. The amplifier stage also compensates for any frequency mismatches in the frequency of the quartz crystal signal. The amplifier is also designed to maintain the stability of the oscillation frequency over variations of temperature, input voltage, and other parameters.Due to its high stability and accuracy, the 653L20005C3T oscillator is widely used in applications that require precise timing signal generation for synchronisation, stabilisation, and control. Common applications include processor, system, and embedded systems timing, precision microwave and RF components, frequency synthesizers, and many more.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description