Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are circuits that produce a constant sine wave to generate precise waveforms that can be used for a wide range of applications such as radio receivers, clocks, computers, and other digital electronics. The 653P21256C2T is a type of oscillator that uses the Pierce oscillator configuration to generate its output waveform. This type of oscillator is typically used to generate signals at GHz frequencies.

653P21256C2T Application Field and Working Principle

The 653P21256C2T oscillator is designed for use in applications such as radar, point-to-point communications, and other high frequency systems. The oscillator is capable of generating a single frequency waveform between 2.85 and 3.6 GHz. The device\'s output power is selectable and can be set up to +17 dBm with an available output power range of -7 dBm to +17 dBm. The maximum phase noise of the device is specified as -97 dBc/Hz at 1 kHz offset.

The 653P21256C2T employs the Pierce Oscillator configuration. This configuration uses an active device in the form of a bipolar transistor or field-effect transistor, a feedback and input network, and a load capacitance to form an oscillator loop. The active device is the main component of the loop and is used to amplify the signal generated by the input circuit. The feedback and input network is composed of capacitors and resistors and is used to control the frequency and amplitude of the output waveform. Finally, the load capacitance is used to ensure that the output waveform meets the desired performance specifications.

The Pierce oscillator offers a number of advantages over traditional configurations, such as the Colpitts or Clapp Osciliator. It is very stable and offers good phase noise performance. The phase noise performance of the 653P21256C2T is specified as -100 dBc/Hz at 10 Hz offset, -118 dBc/Hz at 100 Hz offset, and -127 dBc/Hz at 1 kHz offset. It also features a low power consumption of 1.5 W.

The 653P21256C2T oscillator can be used for a wide variety of applications in the 2.85 - 3.6 GHz frequency range. Its low power consumption and excellent phase noise performance make it suitable for low-noise high-frequency systems such as radar and point-to-point communications. It is also an ideal choice for low phase noise clock generation or other digital radio systems that require a highly precise waveform.

The specific data is subject to PDF, and the above content is for reference