70-OAC24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

I/O Relay Modules are used to control the flow of electricity in an automation system. The 70-OAC24 is a digital output-actuated control module that is designed to control and coordinate power outputs between two separate loads. It can be used to operate lamps, motors, fans, pumps, and other selectively energized equipment.

The 70-OAC24 was developed to control the flow of AC power to two separate loads. It has two outputs, each of which controls a separate load. The output, designated as a “load in”, is the input to the 70-OAC24 module from a source of AC power. The output designated as a “load out” is the output to the connected load from the 70-OAC24 module. A green LED is present on the 70-OAC24 module which indicates when the output is energized.

The 70-OAC24 module uses a digital output to control its power outputs to two separate loads. The module has a rotary selector switch which is used to select the desired output. There are four possible outputs available: On/Off, Dimup/Dimdown, Run/Start/Stop, and Cycle/Repeat. If the desired output is not selected, the module will default to either the On/Off or Dimup/Dimdown output.

The On/Off output is used to supply either full power or no power to the connected load, while the Dimup/Dimdown output is used to gradually reduce or increase the power to the load. The Run/Start/Stop output enables the user to control the operation of the connected load. The Cycle/Repeat output enables the user to cycle the connected load on and off, or to repeat a set cycle of operations.

The 70-OAC24 module is designed for use in a wide variety of applications. Its output selection capabilities make it ideal for applications where fine control of power outputs is needed, such as lighting and HVAC systems. Additionally, it can be used for operating a range of industrial equipment, such as motors and pumps. The module can be used in a wide range of temperatures, from -40°F to 185°F, and at a variety of operating voltages, from 12-240V.

The 70-OAC24 module is designed with safety in mind and is compliant with UL, CSA, and IEC standards. It can be used in hazardous locations rated Division and Zone, Class II, Division 1 and Division 2, Groups A-D. The module is also designed for easy installation and setup, allowing for quick connection to the control system.

To summarize, the 70-OAC24 is a digital output-actuated control module designed for use in automation applications. The module has four outputs to choose from, and can control up to two separate loads. It is designed for use in a wide range of different industries, and has a variety of safety and operating features to ensure reliable operation.

The specific data is subject to PDF, and the above content is for reference