Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary Switches

Rotary switches are versatile switches used in many applications. They work by turning a mechanical handle to move a contact arm within a circular frame. The contact arm makes contact with stationary contact points, which then activate or deactivate the switch. Rotary switches have many uses including controlling electrical circuits, starting and stopping motors, and other applications where multiple settings or on/off positions are required.

711-5-T2 Rotary Switch

The 711-5-T2 rotary switch is a five-pole, two-position switch perfect for simple switching applications. The switch is rated for five amperes and 250/125 volts AC. It is designed for reliable, long-lasting operation and is UL and CSA approved. The switch is easy to install with stationary mounting and snap-in contacts.

Application Fields

The 711-5-T2 rotary switch has many applications, including automotive and industrial control, garden machinery, office machines, and other AC lighting circuits. It is also used in many home applications, such as replacing faulty switches in lamps, radios, and other appliances.

Working Principle

When the actuating handle of the 711-5-T2 rotary switch is turned, the contact arms inside the switch move between two positions - usually referred to as “on” and “off”. When the switch is in the ‘on’ position, an electrical connection is made between the contact arms and their respective contact points. This connection completes the circuit, allowing electricity to pass through the switch and run its intended course. Conversely, when the handle is turned to the ‘off’ position, the contact points no longer make contact, thus interrupting the circuit.

Assembly and Cleaning

The 711-5-T2 rotary switch is relatively easy to assemble with the use of a few common tools. Care must be taken to not overtighten the screws and mounting nuts and to ensure all surfaces are clean and dry before installation. Worn out contacts can cause poor performance and reduce the life of the switch. It is important to clean the switch using a soft brush and mild cleaner, as any abrasive products or harsh chemicals could severely damage the switch.

Safety

Rotary switches can be dangerous if used without proper safety precautions. It is important to be aware of the current and voltage ratings of the switch to ensure compatibility with the load and properly protect it from any potential hazards. Rotary switches must also be grounded or have an operating handle lock to prevent accidental activation of the switch. Additionally, a ground fault circuit interrupter (GFCI) must be installed in any circuits where wet or damp conditions exist.

Conclusion

The 711-5-T2 rotary switch is a great choice for simple switching applications as it is easy to install, reliable, and long-lasting. Careful installation and periodic cleaning will extend the life of the switch and ensure safe operation. Throughout its lifetime, the switch should be properly maintained and kept away from any potentially hazardous environments. With these simple precautions, it will continue to provide reliable switching services for many years to come.

The specific data is subject to PDF, and the above content is for reference