7207L35P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

7207L35P is an integrated circuit (IC) component manufactured by Texas Instruments Inc. It is part of the Logic - FIFOs Memory family of ICs and is generally used in applications requiring data storage and retrieval. The component enables the storage and retrieval of digital data in a wrapped or circular FIFO fashion, meaning that when data reaches the end of the allocated storage space, it wraps back around to the beginning so that the device can store new data. This is beneficial in applications with limited space or that require frequent access to data.

The component is available in both eight- and sixteen-bit formats, meaning that it can be used to store both 8-bit and 16-bit data. In terms of physical size, the component has a footprint of just 0.5 x 0.25 inches, and the maximum power dissipation is 0.5W. Also, the component has an operating voltage of 3.3V, though in order to support 1.8V logic devices, the component has two limiting lower voltage pins VIOA and VIOB.

The 7207L35P also features controlling signals comprising of a read clock enable pin, a write clock enable pin, a chip select pin and a pre-charge pin. A user sets the speed at which data is read or written to the component using a separate programming signal for each of the read and write clocks. This helps the user to maintain control over the data speeds and eliminates the need for separate speed settings on both the read and write clocks.

The FIFO part of the component is comprised of four separate memory blocks, each with a capacity of 16K bits. The component can be used to store both data and program instructions in the FIFO. Data stored in the FIFO can be either 8- or 16-bits wide, depending on the programming signal inputs. Each block of the FIFO is capable of reading data at a rate of 3.2MB/s or 16Mb/s, depending on the clock signal settings.

7207L35P also features an address counter, which tracks the address of data stored in the FIFO. The address counter functionality is coupled with the data stored in the FIFO, allowing data to be accessed from any location within the FIFO without the user needing to manually search for the data. The counter can also be used to monitor the amount of data stored in the FIFO and alert the user when the capacity of the FIFO has been reached.

In addition to its FIFO capabilities, 7207L35P also has a timing section, which can be used to generate a variety of timing signals for external devices. The timing section can be programmed to generate signals such as write-complete-strobes, read-complete-strobes, data-strobes and wake-up signals.

All of these features make 7207L35P an ideal choice for applications requiring FIFOs as well as control signals. The component is widely used in applications such as serial communication, data synchronization, embedded systems, audio and video protocols, and streaming data applications. Furthermore, the component is available in both through-hole and surface-mount packages making it suitable for use in any size and type of system.

The specific data is subject to PDF, and the above content is for reference