731-10073-01000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

D-Sub Cables, such as the 731-10073-01000 model, are a type of electrical interconnection in which connectors and cables are used to connect computers or other electronic components. Each cable component is designed to match the corresponding connector, so that when connected, the cable will have the correct number and type of pins or contacts for the connector. The cables are usually round, and they may have a 20 or 27-pin configuration. The shielding materials used in the construction of the cable can greatly affect the performance of the system, and the quality of the shielding materials can also impact the performance of the cables.

Application field

D-Sub Cables are designed for use in many different industrial and consumer applications. These cables can be used to connect computers, electronics and instruments, as well as in telecommunications and office equipment. Some of the most widely used applications are in broadcasting, data communication, industrial automation, instrumentation, machine tool control, power generation, printing, robotics, and medical imaging. The 731-10073-01000 model is designed for use in applications where high speed data and reliable signal performance is required.

Working Principle

The working principle of the 731-10073-01000 model is based on the physical contact between the pins and the connectors. The connections are made by applying pressure to the contacts with a special tool, which allows for a stable connection between the components of the cables. The materials used in the construction of the cable are designed to withstand temperatures up to 200°C, and the cable connections are sealed with a protective cover to prevent any moisture or dust from entering the connector.

The cables themselves are made from high quality materials that are resistant to abrasion, dust, temperature and vibration. The connectors and pins are designed to fit the slots in the connector, and the pins are also designed to fit the slots in the cable. The cables come with optional strain relief boots which prevent the strain on the cable from damaging the pins.

The cables are also designed to provide a reliable and consistent connection between the components of the system. The cables are designed to protect the signal from interference and noise from other components, and they can also help to reduce the time required to transfer data between components. The cables are also designed to reduce the chances of data loss due to damage or interruption.

The specific data is subject to PDF, and the above content is for reference