742792032

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite Beads and Chips are becoming increasingly important components in the design of electronic systems. 742792032 is a popular choice in this field, and its application and working principle is discussed here.

Ferrite beads are small cylindrical or flat-shaped devices that consist of a magnetic material, usually ferrite, which provide effective impedance suppression for signals on transmission lines. The E-number (742792032) indicates the physical size and permeability characteristics of this component. At frequencies lower than one gigahertz, this device is designed to provide a direct current (DC) value of one ohm per bead. The device’s high-frequency properties are also well-suited for applications above one gigahertz.

When 742792032 is placed in series with a digital signal path, it forms a low-pass filter whose cut-off frequency is determined by the bead’s inductance and capacitance. The beads also prevent the transmission line from being disturbed by transient voltage levels, particularly during power-on and power-off transients. Ferrite beads can also suppress high-frequency noise and reduce EMI (electromagnetic interference).

A ferrite chip is a special type of device that incorporates a ferrite material and is designed to provide high levels of impedance on both the low-frequency and high-frequency ranges. These devices are typically low-profile and can be used to construct small filters for suppressing high frequency noise. Chips are also used to construct high-frequency decoupling capacitors, which can be used to achieve higher signal integrity in digital systems.

The working principle of a ferrite bead such as 742792032 resides on the magnetic field generated by the high inductance of the component. When an alternating voltage is applied across the component, the far end of the bead’s magnetic field becomes smaller than the near end, and the differences in the opposing magnetic fields generate a voltage drop across the bead. This voltage drop works to reduce the amplitude of any undesired signals present on the line.

The interface between a ferrite bead and a PCB (printed circuit board) is also very important. In order to ensure that the functionality of the bead is preserved, a surface-mount pad should be used to provide a direct electrical connection. The pad should be placed on the innermost side of the PCB, closest to the component, in order to reduce the amount of exposed traces that can interfere with its performance.

In conclusion, 742792032 is a popular ferrite bead and chip component used to provide effective suppression of signal degradation on transmission paths. The device’s working principle is centered on the component’s high inductance, and its interface to the circuit board is also important. Ferrite beads and chips are valuable components in the design of electronic systems, providing shielding and filtering to reduce interference and ensure high signal integrity.

The specific data is subject to PDF, and the above content is for reference