74AC541SJ

Series:	74AC
Packaging:	Tube
Part Status:	Obsolete
Logic Type:	Buffer, Non-Inverting
Number of Elements:	1
Number of Bits per Element:	8
Input Type:	--
Output Type:	3-State
Current - Output High, Low:	24mA, 24mA
Voltage - Supply:	2 V ~ 6 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	20-SOIC (0.209", 5.30mm Width)
Supplier Device Package:	20-SOP
Base Part Number:	74AC541

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74AC541SJ Logic - Buffers, Drivers, Receivers, Transceivers:The 74AC541SJ is a logic buffer/driver/receiver, which incorporates five signal lines into a single package. In a sense, it can be seen as a second-level signal splitter that allows signals from a single source to be routed to one, two, or three other disjoint paths. It works with both CMOS and TTL levels, and can be used to interface between different logic families. This makes it useful for bridging multiple systems, such as microcontrollers and general-purpose logic. The 74AC541SJ operates using the open-collector architecture. In this design, each logic buffer has an output that can be either in a high (1) state or a low (0) state. When the input is in a low state, the output is in the low state. When the input is in a high state, the output is open-collector, meaning that either no current flows or a very small amount of current flows. The output is then pulled up to the high state by an external low-impedance resistor.The 74AC541SJ package features five individual unbuffered buffering logic buffers, meaning that each data line can be driven directly and independently. Each buffer features a default open-collector output and built-in resistors that can be used to create a higher-impedance open-collector connection, providing improved noise immunity. The device is also designed to withstand intermittent outputs and over-driving without damage. The 74AC541SJ also employs Schmitt triggering and hysteresis, meaning that an additional resistor is not necessary to ensure clean switching between logic states. This eliminates the need for manual switch settings and reduces system complexity. The package is designed for use in applications involving extended temperatures and other harsh environmental conditions. It is also designed for plug-in compatibility with a variety of automotive applications. And of course, it complies with all applicable safety standards. To sum up, the 74AC541SJ is a versatile logic buffer/driver/receiver that can be used to bridge multiple systems and handles a wide range of input and output levels. It features five separate logic buffer lines and incorporates Schmitt triggering and hysteresis, providing improved noise immunity. The package is designed to withstand extended temperature ranges and harsh environmental conditions, making it an ideal choice for automotive applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description