74ACT11004DWR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74ACT11004DWR is a quadruple positive-edge triggered D-type flip-flop with reset and data inputs, commonly used in a variety of digital logic applications. It functions as a data storage device with its four independent data flip flops, where each flip flop stores one bit of data upon receiving an input signal at its clock (CLK) pin. The flip-flop can then switch to the output data (Q) pins, allowing four bits of data to be stored at any given time.

The 74ACT11004DWR is categorized under the logic gates and inverters type of logic, as it acts as both a gate and an inverter. As a gate, it acts as a switch to either block a signal from entering the circuit or allow it to pass through; and as an inverter, it toggles a digital signal\'s value from logic "0" to logic "1" or vice versa.

One common application for this device is in the design of digital memory systems. A great example of this is the use of the 74ACT11004DWR in the design of a simple RAM memory module. When the device is loaded with data from an external source, each of its four flip-flops will sequentially store one bit of data, with each bit addressing a single cell in the RAM. By using multiple 74ACT11004DWRs in combination, larger memory systems can be constructed and used to store various types of data.

The working principle of the 74ACT11004DWR is fairly simple. Each device contains four single-bit flip-flops, each with two data inputs: a data signal (D) and a clock (CLK) signal. When the clock signal, containing a certain frequency that allows the flip-flop to rapidly switch its value several times, is activated, the device registers the data signal’s logic level, and stores it in the flip-flop. Then, the four flip-flops are enabled and their output pins are available for use.

Additionally, the device also contains preset and reset pins, which are used to clear the flip-flop\'s internal state. The preset pin (PRE) is used to override the device’s internal state, forcing all four flip-flops to "1" regardless of the data signal. The reset pin (RST) is used to reset the device\'s internal state, forcing all four flip-flops to logic "0".

All in all, the 74ACT11004DWR is a very useful device in the area of digital memory systems design, as it is relatively simple to integrate into any system, with minimal setup and wiring. The device’s ease of use and reliability are two of the main factors that make it popular in the field of digital logic applications.

The specific data is subject to PDF, and the above content is for reference