74ACT273SC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip-flops are one of the most fundamental components of digital logic systems, providing basic storage capability and control logic. The 74ACT273SC is a classic highly integrated, low-power, high-speed flip-flop with complementary output and is, thus, often used in various applications.

The 74ACT273SC is a synchronous, dual master-slave, edge-triggered flip-flop. It is designed for use in high-performance memory and microprocessor-based systems. Its operating temperature range is from -55C to 125C, with the outputpropagation delay time of 12ns. The features of this device makes it attractive for the following applications:

Data Storage: Flip-flops are used for data storage applications in computers, TVs and mobile devices. The 74ACT273SC flip-flops can be used for temporary storage of digital data, before sending it to some other component for further processing and/or transmission.

Data Acquisition: Flip-flops can be used to capture a series of data in a sequential manner. This is in contrast to the parallel data acquisition capabilities provided by the memory components. The 74ACT273SC flip-flops are used in medical applications for recording patient-related data over time.

Digital Logic:The 74ACT273SC flip-flops are used in general logical operations in digital circuits, such as designing logic controllers, finite state machines and registers.

Working Principle:The 74ACT273SC is a dual edge-triggered flip-flop with two sets of inputs and outputs. It is a master-slave flip-flop, meaning that it is composed of two separate flip-flops. The master flip-flop latches the data and the slave flip-flop transfers the data to the output. The device includes setup/hold times and asynchronous enable/disable inputs. The master and slave flip-flops can be clocked on either the falling or rising edges of the clock.

The 74ACT273SC has two sets of complementary outputs, named Q and /Q. These signals are active-low and active-high respectively. The device is operated in either positive-edge or negative-edge triggering modes, and has set-up and hold times, which must be taken into consideration when operating the device. The device is designed to tolerate switches up to 8.0V, so it is suitable for use with low-voltage signals.

The 74ACT273SC also features asynchronous enable (E) and asynchronous disable (G) inputs. When E is high, the Q output is set to the level of the data input, while when E is low, the data is stored and held at the output. When G is high, the Q output is cleared to a low level, regardless of the level at the data input.

The 74ACT273SC is a power-efficient device and consumes low quiescent current, making it suitable for battery-powered applications. The device also features Schmitt trigger inputs, meaning they are immune to noise and glitches. These features, combined with its high-speed characteristics and wide operating temperature range, make the 74ACT273SC a suitable choice for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference