74ACT825MTCX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74ACT825MTCX belongs to the family of Logic- Flip Flops and is mainly used in flip-flop driven digital applications. It is designed to deliver high performance and designed to reduce propagation delay. It can be used in applications that need to maintain logic levels across multiple devices or when the logic levels between different clock transistors must remain in sync. It is well suited for digital applications that require low power consumption or that require multiple logic levels.

The 74ACT825MTCX allows two flip-flops to be clocked simultaneously. It also allows two clock signals to be sourced from different points on the same device. The device has a unique design feature which significantly reduces input to clock skew, enabling higher switching speeds than traditional flip-flops. This reduces overall switching power consumption and improves power efficiency.

The 74ACT825MTCX has a maximum operating temperature range of 0-125°C and is available in both surface mount and through-hole packages. It is suitable for use in commercial and industrial applications, such as PCB design, signal switching, and timing control. The maximum operating frequency is up to 50MHZ. The device has an 8-bit output register, with an asynchronous clear and preset. This enables the user to quickly reset or set all 8 bits with a single signal.

The 74ACT825MTCX has a 16-bit wide data/address bus. It has a latch enable/disable feature that allows both synchronous and asynchronous operation. It also has an internal data protector which helps to protect the data from accidental corruption. Additionally, the device has a separate reset input that allows for a clean reset of the device if needed. This allows a user to quickly reset the device and start from a clean slate.

The 74ACT825MTCX has two active-low outputs. The Q and Q# outputs are pulled up to VCC. The Q and Q# outputs can also be used as inputs to another device and data latched into the device when the latch enable signal is asserted. The device also allows for level shifting of the data on the data bus, allowing the device to interface with many different types of external devices.

The working principle behind the device is straightforward. When the chip is clocked, the data is transferred to the output latch. The data is then held in the output latch until the next clock pulse is received. If the data differs from the stored value, the output latch is updated with the new data. The device then continues to update itself in response to the pulses from the clock input.

The 74ACT825MTCX is an ideal device for applications that need to maintain logic levels across multiple devices and when the logic levels between different clock transistors must remain in sync. It is also well suited for digital applications that require low power consumption or that require multiple logic levels. It has a wide range of uses, from signal switching and timing control to PCB design.

The specific data is subject to PDF, and the above content is for reference