74AHCT1G126SE-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74AHCT1G126SE-7 is a logic device in the Buffers, Drivers, Receivers, Transceivers category that is used for various applications. It is a non-inverting logic buffer with a tri-state output that can be used for a variety of switching and signal buffering applications. This device has two inputs, a clock input, and an enable input. It also has a tri-state output that can be enabled or disabled through the enable input.

The 74AHCT1G126SE-7 has a wide operating voltage range of 2.5V to 5.5V and a low power consumption of 70mW. It is also able to operate over a wide frequency range of 50 MHz to 150MHz and it has a propagation delay of 3.7ns at the minimum frequency of 50MHz. It can also easily interface with both push-pull and open-drain outputs, making it suitable for use in applications that require high speed switching.

The main application of the 74AHCT1G126SE-7 is in signal buffering. In signal buffering applications, the device can be used to buffer signal signals and reduce signal losses due to long transmission lines. It can also be used in signal conditioning applications to condition analog signals before they are passed to a digital signal processor.

The working principle of the 74AHCT1G126SE-7 is quite simple. When the clock signal is low, the output pin is in a “high-impedance” state. This means that it does not sink or source any current and therefore does not act as a circuit element. When the clock signal is high, the output pin is driven low or high depending on the logic level of its input. If the input to this circuit is high, the output will be driven high and vice versa. The enable input can be used to disable the output, setting it to a high impedance state until the enable signal transitions to low.

The 74AHCT1G126SE-7 is a useful and versatile logic device that is suitable for a variety of applications. It can be used to buffer and condition signals before they are processed by other logic circuits. It has a low power consumption, wide operating frequency and propagation delay range, making it an ideal choice for use in high speed applications.

The specific data is subject to PDF, and the above content is for reference