74ALVCH16245T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to 74ALVCH16245T

The 74ALVCH16245T is a high-performance dual-port, reprogrammable, CMOS transceiver with input/output registers. It is suitable for applications with fast serial data transmission. This device also has low propagation delay, wide data bus, and integrated bus hold registers. The 74ALVCH16245T is ideal for use in applications such as communication systems, memory and video applications.

Application Field

The most common application for the 74ALVCH16245T is in low-speed data transmission environments. Since the device integrates a set of buffer, receiver, and bus hold registers, it is usually used as an interface between a serial port and a low-speed digital bus. The device is capable of operating in both 5V and 3.3V voltage levels.

The 74ALVCH16245T is also ideal for memory and video applications. These applications require a high-speed, low-delay data transmission. The device\'s combination of fast read/write times and low propagation delay makes it an excellent choice for these types of applications.

The device is also suitable for multi-drop bus architectures. Its low power consumption and low-voltage capabilities make it ideal for use in applications where power conservation or limited power supply are important, such as automotive and portable systems.

Working principle

The 74ALVCH16245T consists of two ports, each of which can be configured to either an output or an input. Each port has an eight-bit wide input and output register. The device also has an integrated bus hold register that holds data received from the bus when the port is disabled.

The device is reprogrammable and can be configured according to the user\'s specifications. The port directions and bus hold registers can be configured to change the direction of data flow between the two ports. This feature allows data to be transmitted between two devices, even if the devices are not programmed to communicate with each other.

When the device is operating as a transceiver, the data is first transmitted from the output port. The data is then received on the input port. The data received is then compared to the data that was transmitted from the output port. If there is a mismatch, an error signal is generated. The data received is then stored in the bus hold register until the port is enabled again.

The device also features a set of control pins that can be used to control the device\'s operation. These control pins can be used to enable or disable the device, reset the device, and control the flow of data between the two ports. These control pins can also be used to select the proper operating mode of the device.

Conclusion

The 74ALVCH16245T is a dual-port transceiver that is suitable for many types of applications. It can be used in memory and video applications, communication systems, and multi-drop bus architectures. The device is reprogrammable and can be configured according to the user\'s specifications. It is also capable of operating in both 5V and 3.3V voltage levels.

The 74ALVCH16245T is an excellent choice for applications that require reliable data transmission and a high level of integration. Its combination of features make it an ideal device for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference