74AUC1G125DCKRE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74AUC1G125DCKRE4 is a single-channel, low-voltage, non-inverting level translators that enables low-voltage digital system designs to interoperate with 5-V signals typically associated with commonly used logic devices in various architectures. It is a member of logic-buffers, drivers, receivers, transceivers family and provides a simple, inexpensive solution for interfacing a 1.2-V, 1.5-V, 1.8-V, 2.5-V, or 3.3-V digital system to 5-V logic.

The 74AUC1G125DCKRE4 logic device features a programmable propagation delay and is designed to be used with either push-pull or open-drain outputs. It is a 3-state buffer with outputs with adjustable sink/source current capability, allowing it to drive heavier loads. The device permits continuous output of TTL and VCC signals, allowing users to control the output pin without the need for additional external components. It has a complete power-on reset and power-down protection that ensures these low voltage logic levels are never destroyed when interfaced with higher voltage logic.

The 74AUC1G125DCKRE4 also features two select pins that allow the user to control the direction of the output to either source or sink current. This makes it ideal for systems which require high current sourcing or sinking, or for data buffering applications which require direction selection based on data input.

This logic-buffer, driver, receiver, transceiver also has an adjustable tri-state threshold. The tri-state threshold is a feature that allows the user to set the minimum voltage that the output will switch to its low impedance state. This allows the device to operate optimally in high-impedance systems.

The 74AUC1G125DCKRE4 has a wide input voltage range. It can operate from a minimum voltage of 0.65V up to the maximum voltage of 5.5V and can accept input voltages as low as 4.5V. It is designed to withstand reverse voltages up to 6V and increases the range of potential uses. This increased operating voltage range allows the 74AUC1G125DCKRE4 to function in applications involving higher voltage devices.

74AUC1G125DCKRE4 is a field effect transistor (FET) that operates as an inverting buffer or level shifter. It allows current to flow in only one direction, from the source pin to the drain pin. When the input voltage is below the threshold voltage, the FET turns off, preventing current from passing. When the voltage is greater than the threshold voltage, the FET turns on and allows current to flow through.

The 74AUC1G125DCKRE4 is a great logic device for interfacing two systems with different voltage levels. Its compatibility with a wide range of input and output voltages makes it suitable for many applications. Additionally, the adjustable tri-state threshold and select pins enable users to control the direction of current flow and set the minimum voltage level at which the output will enter its low-impedance state.

The specific data is subject to PDF, and the above content is for reference