74AUP1G80GW,125

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic Flip-Flops are digital circuits that, when triggered by an input signal, will remain in a state until triggered again by a new input signal. This can be used as a form of timing and memory in digital circuits, allowing them to be used in computers, embedded systems, and other digital applications. One such type of Flip-Flop is the 74AUP1G80GW or the “Single chip multipurpose flip-flop solution”, which is a 6-channel, 8-bit Logic Flip-Flop with low power consumption.The 74AUP1G80GW is very versatile in its application field due to its dynamic and logical usage as a type of flip-flop. It is designed to operate with a wide range of clock frequencies, and it can be used as a latch to provide dynamic logic for temporary storage, or as a flip-flop for primary logic applications. With its low power consumption, it can be used in various embedded systems where tight power budgets are a must. It has been used in various applications from industrial, consumer and automotive to medical, datacom and gaming. It is also suitable for hardwired implementation or be used as a programmable logic device.The 74AUP1G80GW has a synchronous design with individual control inputs for each flip-flop. Depending on the logic of the input signal and the logic of the clock signal, it will enter either positive edge triggered or negative edge triggered state. In positive edge triggered state, the state will change on the rising edge of the clock and in negative triggered state, the state will change on the falling edge.On the hardware level, a 74AUP1G80GW consists of 8 transistors – 4 npn transistors and 4 pnp transistors. The npn transistors are responsible for setting and reseting the output of the flip-flop and the pnp transistors are responsible for the buffer between the input and the output, ensuring that the output is not affected by the input state.On the logic level, the 74AUP1G80GW contains two inputs and two outputs; the data input and the clock input, and the Q and Qbar outputs. Depending on the logic value of the data and clock, the outputs will either remain as they were or be reversed depending on the state of the flip-flop.The 74AUP1G80GW is a versatile and dependable logic flip-flop solution with wide application field. Its low power consumption makes it suitable for many power sensitive applications, while its synchronous design ensures stability and accuracy of the output. With its ability to be used as either a latch or a flip-flop and its wide range of clock frequencies, the 74AUP1G80GW allows for a variety of dynamic logic applications.

The specific data is subject to PDF, and the above content is for reference