74AUP2G126DC,125

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Buffers, Drivers, Receivers, Transceivers are active electronic components that are used to amplify or switch digital signals. The 74AUP2G126DC,125 are designed to control 2-level ASICs, 4 to 12 different digital signals. It is a Triple 1-to-2 Non-inverting Buffers/Drivers. Its high level logic swing, low power dissipation and low output leakage make it suitable for these logic-level applications.

The 74AUP2G126DC,125 includes an inherent enable/disable function. The Enable/Disable input is an asynchronous control which gates the output off when it is in either a high or low logic state, whatever the input is. The output has two poles which can be used to drive two ASICs at the same time. The output state is completely determined by the input state.

The operating range of the 74AUP2G126DC,125 is from 1.2V to 3.6V. The output slew rate is 0.75V/ns at 3.3V and 1V typical down-scaled supply. Its standby power has a value of 0.4 /0.6 μW which may be suitable for power constraint applications. In addition, its high speed datarate is 160 Mbps/400 Mbps (5V/12V) at single, dual or multiple output stages.

The application field of the 74AUP2G126DC,125 is wide. It is commonly used for a variety of different digital logic levels, such as ASICs, microprocessors, DSPs, and embedded controllers. It can be used in signal isolation, signal routing, low-power system design, etc. Furthermore, it is suitable for 5V and 3V logic systems, and logic level conversion.

The working principle of the 74AUP2G126DC,125 is based on the Input/Output characteristics of the device. The input signal is applied to the input of the device while the output signal is generated at the output of the device. The output voltage level is determined by the input voltage level. Depending on the level of the input signal, the output signal can be either a high or low voltage. The output voltage remains in the same state until a new signal is applied to the input.

In conclusion, the 74AUP2G126DC,125 is a triple 1-to-2 Non-inverting Buffers/Drivers that provides an inherent enable/disable function for controlling 2-level ASICs. Its wide range of applications and low power dissipation makes it suited for digital logic level control. Finally, the working principle is easy to understand since the output voltage level is simply determined by the input voltage level.

The specific data is subject to PDF, and the above content is for reference