74AXP2G07GMH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74AXP2G07GMH is a member of the Nexperia Logic portfolio, and is part of a group of devices known as Buffers, Drivers, Receivers, Transceivers. These devices have a multitude of uses, because they are all used to move signals from one circuit, node, or device to another.

Buffers are simple amplifying devices used to strengthen a signal before it\'s sent downstream. They are typically used to drive long traces on a printed circuit board. Buffers typically have multiple input/output (I/O) pins, and use slew-rate techniques to limit the propagation delays of the signal. One common type of buffer, which is seen in the 74AXP2G07GMH, is known as a tri-state buffer. This type of buffer has an "enable" pin that can toggle the output pins on or off.

Drivers are a type of amplifier used to drive heavy loads. They typically rely on a high current to carry large capacitive or inductive loads over heavy traces. Different types of drivers are used to drive LEDs, relays, solenoids, and other heavy loads. Drivers also commonly use transistors to activate the load directly, such as in the 74AXP2G07GMH.

Receivers are a type of amplifier used to detect small board level signals. A common type of receiver, which is seen in the 74AXP2G07GMH, is referred to as a level shifter. This device is used to boost a small voltage or current into a higher voltage or current. Receivers also employ various techniques such as hysteresis and edge detection to identify the start and stop of signals.

Transceivers are used to send and receive signals on a board-level component. They are typically used to interface two different components, such as a MOSFET and a logic circuit. Transceivers typically employ differential signaling, which is used to improve immunity to noise and other electrical interference. Transceivers also use high speed differential signaling, which can improve propagation delays and reduce jitter on the signal.

The 74AXP2G07GMH is part of a family of logic devices known as Buffers, Drivers, Receivers, and Transceivers. Buffers are used to strengthen a signal before it\'s sent downstream. Drivers are used to drive heavy loads. Receivers are used to detect small board level signals. And, Transceivers are used to send and receive signals on a board level component. These devices all play an important role in today\'s electronics designs, enabling signals to move from one circuit, node, or device to another.

The specific data is subject to PDF, and the above content is for reference