74FCT162374ATPVG8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Flip Flops

Flip flops are digital logic devices utilized in a wide range of applications. They are relatively simple devices, consisting of an input, a clock signal, and outputs. The most common type of flip flop is a type of sequential logic device known as a “divide by-two counter”, which allows for a user to count up and down between two binary numbers. A divide by-two counter is composed of two stages: an asynchronous “preset” flip flop and a synchronous “divide by two” flip flop.

The 74FCT162374ATPVG8 is a bi-stable asynchronous logic device, specifically designed for memory synchronization and signal translation in applications such as Pulse Code Modulation (PCM) coding and cable transmission. The device utilizes a two-stage flip-flop design, incorporating two separate input stages and two separate outputs. The two stages are connected internally by a multiplexer, allowing control of the output signals. The 74FCT162374ATPVG8 has two input pairs (I/O), which can be independently programmed to accept either logic “1” (“high”) or logic “0”(“low”) inputs. When the input conditions are such that both input pairs are low (logic 0), the device’s output will remain unchanged. However, when either input pair (or both) are at logic 1, the device’s output will change to reflect the stimuli.

The 74FCT162374ATPVG8 can also be used in other applications, such as synchronizing digital logic, or as a store and forward device in order to reduce unpredictable changes in logic levels. This device can be used in a variety of systems, including consumer electronics, gaming systems, and instrumentation. Additionally, the device can be used as an internal multiplexer, allowing switching between two signals.

The 84FCT162374ATPVG8 can also be utilized in timing applications, as it has independent asynchronous inputs and outputs. This is advantageous in applications such as polling and sequencers, which require precise timing. Additionally, the device is capable of being used as a data rate buffer, allowing for changes in the data rate of an input signal to be applied to an output signal, without compromising on the accuracy of the output signal.

In summary, the 74FCT162374ATPVG8 is a bi-stable asynchronous logic device that can be used in a variety of applications. It is composed of two stages; an asynchronous preset flip-flop and a synchronous divid by-two flip-flop. Its two phases can be independently programmed to accept either logic “1” (“high”) or logic “0”(“low”) inputs and the device can be used to synchronize digital logic, as a store and forward device, or as a timing buffer.

The specific data is subject to PDF, and the above content is for reference