74FCT162374CTPVCT

Trigger Type:	Positive Edge
Base Part Number:	74FCT162374
Package / Case:	48-BSSOP (0.295", 7.50mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TA)
Input Capacitance:	4.5pF
Current - Quiescent (Iq):	500µA
Voltage - Supply:	4.5 V ~ 5.5 V
Current - Output High, Low:	24mA, 24mA
Series:	74FCT
Max Propagation Delay @ V, Max CL:	--
Number of Bits per Element:	8
Number of Elements:	2
Output Type:	Tri-State, Non-Inverted
Type:	D-Type
Function:	Standard
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 74FCT162374CTPVCT is a logic-Flip Flop designed as a type of circuit that can switch from one state to another and stay in the newly established state until changed again. It is an electronic component that functions as a memory cell, or storage facility, that stores an output state by means of input control signals. It enables an input signal to assume an output signal that can either stay the same or switch from one state to another, thus providing ideal protection from circuit operation errors even with highly complex logic circuits. This article is dedicated to discussing the functions and applications, as well as the working principles, of the 74FCT162374CTPVCT.

Functions and Applications

The 74FCT162374CTPVCT is an ideal solution for increasing speed, reducing power consumption and protecting against circuit operation errors in a wide range of applications. At its basic level, the 74FCT162374CTPVCT is designed to provide logic functions of addition, subtraction, inversion and memory read/write as well as to perform a variety of timing operations.When used in synchronous systems, the 74FCT162374CTPVCT can be used to implement a variety of digital designs and architectures, such as register-to-register transfer, counter, decode and arithmetic circuits. Their high-speed operation for use in memory arrays and shift registers have made the 74FCT162374CTPVCT a popular choice for designers who need to increase speed and reduce power consumption.The 74FCT162374CTPVCT is becoming increasingly popular in the implementation of complex control logic systems, such as in computers, control systems and data communications systems. As the logic circuit becomes more complex, the 74FCT162374CTPVCT can be used to implement faster, more power-efficient designs. It is also ideal for use in combination with programmable logic devices as it can handle high-speed operations for memory- and register-to-register transfer applications.

Working Principle

For the 74FCT162374CTPVCT, the logic input is provided in the form of either a voltage or a logic level, depending on the specific circuitry employed. When the logic input level is at a low state, the flip-flop is in a "set state" and the output assumes the high state. When the logic input level is at a high state, the flip-flop assumes a "reset state" and the output assumes a low state.The length of time that the 74FCT162374CTPVCT will remain in the "set" or "reset" state is determined by the combination of the input logic level, the supply voltage, and the strength of the pull-up or pull-down device connected to the output. It should be noted that the 74FCT162374CTPVCT is not a "stable" latch and hence any input changes will cause the flip-flop to transition from one state to another.

Conclusion

In conclusion, the 74FCT162374CTPVCT is a versatile logic-Flip Flop component suitable for a variety of digital designs and architectures. Its ability to handle high-speed operations for memory- and register-to-register transfers, as well as its power efficiency and robust performance, have made it a popular choice for designers. Further, its ability to switch from one state to another and remain in the newly established state is especially useful for protecting against circuit operation errors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description