74FCT162501ATPACT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74FCT162501ATPACT is a 16-Bit Universal Bus Transceiver, designed for bidirectional buffered data transmission between two separate buses. The 74FCT162501ATPACT supports 1.2V and 1.5V VCC operations, which is ideal for 1.2V and 1.5V applications. The 74FCT162501ATPACT offersthe economical and flexible features needed to support buffered, byte-wide and byte-wide data transfers.

The 74FCT162501ATPACT is designed for low power consumption, high speed, low leakage, and excellent noise and quality performance. It integrates two 16-bit transceiver and one set of asynchronous FIFO register. The 74FCT162501ATPACT also provide dual direction data flow control and read/write side strobe control.The device also meets the JEDEC standard for mixed-voltage operation and is compliant with the ET-BUS standard for reduced-voltage operation.

The 74FCT162501ATPACT has a wide range of applications such as data communications, storage, and networking. It is suitable for logic and memory interfacing, digital data transmission, power management, and buffer subsystems. The device can be implemented in a variety of systems that require buffered data transfers and enables interfaces between two buses.

The 74FCT162501ATPACT provides a dual direction data transceiver with high speed and low power operation. The device is used to interface two buses that use two-way signaling and support two-way data transfers. The transceiver has two control lines: one for reading data from one bus to the other, and another for writing data from one bus to the other. The transceiver also has two enable signals that can be used to enable data transfer from one bus to the other. The device also supports asynchronous FIFO registers for buffering data.

The transceiver has an integrated internal clock divider for timing data transfers and a selectable data bus width for both buses. The device has an integrated multiplexer that can be used to select different combinations of control signals for operation. It also has a synchronous FIFO reset option that can be used to reset the FIFO to its initial state.

The 74FCT162501ATPACT is used in applications such as data communications, storage and networking where bidirectional data transfers are necessary. It allows for low power, high speed, and low leakage performance. The device also supports multiple voltage operations, as well as ET-BUS compliant reduced-voltage operation.

The specific data is subject to PDF, and the above content is for reference