74HC125PW-Q100J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic devices form a key part of the microelectronics industry, being used to process and control a range of signals from digital devices and microprocessors. One such device is the 74HC125PW-Q100J, a quad buffer designed to take small signals and transfer them across a larger circuit. In this article, we’ll be examining the application field and working principle of the 74HC125PW-Q100J.

The 74HC125PW-Q100J provides logic buffers, also referred to as line drivers, to transfer small signals over larger circuits. It is commonly used as an interface between low current circuits, such as CMOS circuits, and higher current circuits, such as bus lines or common points. In this way it amplifies the signals, facilitating the transfer across larger distances.

The 74HC125PW-Q100J can be used in various applications, including general logic circuits and digital logic. It can be used to provide logic control in audio systems, such as for adjusting volume, as well as for controlling the microphone volume in an audio system. It can also be used to provide digital audio signals for noise-cancelling headsets, and is also suitable for digital and analog sensors, such as gas and liquid level sensors. The buffer is commonly used in dot matrix printer applications, for controlling digital signals between the printer head and the logic board.

The 74HC125PW-Q100J operates on two supply voltages, a logic high voltage, between 2.3 and 5.5 volts, and a logic low voltage, between 0.2 and 0.8 volts. The output voltage of the buffer is between the two supply voltages, with a current capability of up to 20 milliamps. The input and output resistance is between 200 and 400 kiloohms, and the operating temperature range is between +25 and +85 °C.

The buffer also features two input states: the logic high, or ‘1’, state and the logic low, or ‘0’, state. When the input is set to a logic high, the output is set to the same voltage as the input, or the logic high voltage; when the input is set to a logic low, the output is set to the logic low voltage.

The buffer also features four outputs, each consisting of an N-channel MOSFET switch. When the input is set to a logic high, the switch is opened and the output is set to the logic high voltage; when the input is set to a logic low, the switch is closed, and the output is set to the logic low voltage. The four output switches can be used as a quad buffer, allowing four separate signals to be transferred simultaneously.

The 74HC125PW-Q100J is a reliable and cost-effective buffer, that is able to transfer small signals across large distances. Its efficient design and wide range of applications make it an ideal choice for a wide variety of projects, from controlling audio levels to transferring digital signals for a dot matrix printer.

The specific data is subject to PDF, and the above content is for reference