74HC594T16-13

Series:	74HC
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	Shift Register
Output Type:	Push-Pull
Number of Elements:	1
Number of Bits per Element:	8
Function:	Serial to Parallel, Serial
Voltage - Supply:	2 V ~ 6 V
Operating Temperature:	-40°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	16-TSSOP (0.173", 4.40mm Width)
Supplier Device Package:	16-TSSOP
Base Part Number:	74HC594

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

74HC594T16-13 is a device two independent 8-bit, serial-in, parallel-out shift registers that can be cascaded together to form a 16-bit shift register. With an enable (EN) input, the register can be used either for single-byte or multi-byte operation in both serial or parallel modes of operation. The device is part of Logic - Shift Registers and it can be used in a variety of applications, including serial data acquisition, data conversion, and data transmission.

Application Field

74HC594T16-13 is used in a variety of applications, such as data acquisition, data conversion, and data transmission. The device can be used for single-byte or multi-byte operation in both serial and parallel modes.In data acquisition applications, 74HC594T16-13 is used to convert incoming serial data into parallel format, so that it can be further processed by a microprocessor. The device can also be used in data transmission applications, where it can be used to transmit data over a serial bus.In addition to data acquisition and transmission, 74HC594T16-13 can also be used for data conversion applications. It can be used to convert between different bit depths or to convert between different formats, such as between BCD and binary.

Working Principle

74HC594T16-13 is a device two independent 8-bit, serial-in, parallel-out shift registers that can be cascaded together to form a 16-bit shift register. It contains two register stages, each of which can be controlled by separate load, clear, and enable inputs.When the load (LD) input is asserted, data input on the serial-in line is captured in the registers. When the clear (CLR) input is asserted, the registers are reset to zero. When the enable (EN) input is asserted, the data stored in the registers is shifted out in parallel on the output lines.The device can be configured in parallel or serial operation. In parallel operation, data is transferred in parallel on the 8-bit data lines. In serial operation, data is transferred serially on the serial-in line and is clocked in with the clock (CLK) signal.

Conclusion

74HC594T16-13 is a versatile device that can be used in a variety of applications, including serial data acquisition, data conversion, and data transmission. It can be used for single-byte or multi-byte operation in both serial and parallel modes. By properly utilizing its load, clear, and enable inputs, the register can be configured for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description