74HC7540D,118 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic components in the field of electronics comprise of logic buffers, drivers, receivers, and transceivers. A 74HC7540D,118 is a logic IC (integrated circuit) that falls into these categories. It is an 8-bit bus transceiver with three-state outputs and a power-off high impedence input feature.

A transceiver is a device that can both transmit and receive signals or data, and is commonly used in telecommunications. The 74HC7540D,118 acts as a bidirectional transceiver betweeen the data and a system bus. The device is essentially made up of an 8-bit bidirectional data port and three-state output buffer. Data on the A bus is transferred to the B bus when the Output Enable (OEAB) input is activated. When the Data Enable (DEAB) pin is used, data on the B bus is transferred to the A bus.

The 8-bit data port reads in 8 bits of data from a single A or B bus and either stores the data or sends the data on to the B or A system bus through its tri-state buffers. This is done using latches with three-state outputs (TTLOctalBuffer). The upper two 4-bit data ports are used to transmit data to the B bus and the lower two 4-bit data ports are used to receive data from the B bus.

The 74HC7540D,118 has two control inputs as well, which are used to control the direction of the data-flow. The first control input is the Output Enable A-B, or OEAB input. This input is used to enable the output buffers and select the direction of the data-flow. When the OEAB input is asserted (or logic 1) the data from bus A to bus B is enabled, and when it is de-asserted (or logic 0) the data from bus B is transferred. The second control input is the Data Enable B-A, or DEAB input. This input is only used when data is transferred from B to A.

In addition to the two control inputs, the 74HC7540D,118 also has two control outputs. These are the Output Enable A and Output Enable B outputs. They are used to control the data flow of the A and B buses respectively. When the OEA or OEB output is asserted (or logic 1), the data is sent from Bus A or Bus B to the data bus and when the output is de-asserted (or logic 0) the data is sent to the opposite Bus.

The 74HC7540D,118 has a wide range of applications. It is commonly used in bidirectional data buses, such as memory controllers, bus bridges, expansion ports, and bus interfaces. It is also used in serial communication lines and direct memory access (DMA) circuits. Furthermore, it is also used in various types of distributed systems and networks.

The 74HC7540D,118 is a powerful and reliable logic IC that provides superior performance in a wide variety of applications. It is an ideal choice for designers looking for a cost-effective solution for their logic needs. With its high speed, reliability, and low power requirements, it is an excellent choice for use in any logic circuit.

The specific data is subject to PDF, and the above content is for reference