74HCT2G16GWH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Buffers, Drivers, Receivers, Transceivers is a type of device that transmits and receives data between two or more parts of an electronic system. The 74HCT2G16GWH is a kind of integrated circuit (or IC) designed specifically for the purpose of interfacing between the different components of such a system. This device is commonly used in telecommunications, networking, and computer systems, as well as various other applications.

The 74HCT2G16GWH is an array of 16 buffer/driver separable devices. Each device consists of two logic devices, a buffer and a driver, with either a high-speed directional output or a low-speed transceiver-level output. These buffers and drivers are required for demultiplexing digital address and data for access to a large array of random-access memory chips. The buffers allow for data memory chip access at a much higher speed than the data rate of the memory chips themselves.

The 74HCT2G16GWH is used in applications that require high speeds and long reach, such as LAN and WAN networks. It is well suited for hot-switching applications, where the load and source conditions can change rapidly. It is also used in systems where Daisy chaining (series connection of multiple parts in a same circuit) is required. The large array of outputs enables long reach with minimal reflections. This enables the 74HCT2G16GWH to be used in complex communications network systems and computer systems alike.

The working principle of 74HCT2G16GWH is based on the transistor-transistor logic (TTL) architecture and uses dynamic power supply management for optimal efficiency. It consists of two groups of 8 buffers, each with 8 differential outputs that drive a full packet of 8 bits to and from the memory chip. A single TTL-level logic input is needed to initiate the buffering and driving of the data signals. Each of the two groups of outputs is separately controllable so that data from two memory devices can be transferred simultaneously and independently. The buffers in the 74HCT2G16GWH provide low propagation delay, low output impedance and are capable of driving up to 1000 pF of capacitance.

Overall, the 74HCT2G16GWH is an effective buffer and driver device designed for high speed and long distance applications. Its TTL-level operation and dynamic power management are necessary for reliable operation, while its array of output enable it to be used in complex, long-reach communications network applications.

The specific data is subject to PDF, and the above content is for reference