74LCX162244GX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74LCX162244GX is a high-performance, low-power, high-speed, low-voltage logic level converter. It belongs to a family of logic buffers, drivers, receivers, and transceivers. This device is designed to improve signal integrity in the transmission of digital signals between two systems or devices operating at different logic levels and voltages in applications such as remote diagnosis and data transfer.

The 74LCX162244GX is a 4-channel buffer/driver with four independent 2-bit or 1-bit channels able to convert between logic voltage levels of 0 to 3.3V and 1.8V. Each channel can support data rates up to 500 Mbps with typical propagation delays as low as 7.3 ns across the full speed range. This allows it to support the fastest signaling protocols such as serial rapidIO, displayport, 10 Gigabit Ethernet and HDMI.

When the input voltage of each channel is applied to the low level (0V), the output voltage of that channel is pulled low to 0V. On the other hand, when the input voltage is applied to the high level (3.3V or 1.8V), the output voltage is pulled high to the corresponding output voltage (3.3V or 1.8V). Thus, this device performs both direction conversions between 0V to 3.3V and 1.8V.

The 74LCX162244GX has a design that combines a thin-film switching matrix with a low-voltage CMOS technology to enhance its performance. The thin-film matrix provides a very low propagation delay by switching the signals on and off quickly, while the low-voltage CMOS technology helps to reduce power consumption.

The device operates at 4.4mA per channel when using a 3.3 Volt supply, and 2mA when using a 1.8 volt supply, making it well suited for low-power applications. This device also has an input hysteresis of 200mV that helps reduce noise sensitivity and an output push-pull drive strength of 6.5mA that helps ensure that the signal is delivered at its destination. Additionally, the 74LCX162244GX has a low-power-down function that enables it to enter low-power mode during periods of inactivity.

The 74LCX162244GX can be used in a variety of applications, including data bus translation, memory expansion, and signal conditioning. For data bus translation, the device can be used to convert the logic level of an incoming signal between 0V and 3.3V, or between 0V and 1.8V, making it useful for connecting different peripherals, such as a USB port to an SD card. For memory expansion, the device can be used to connect two memory units that are not compatible with each other. Finally, for signal conditioning, the device can be used to convert multiple low-voltage signals into a single high-voltage signal.

In summary, the 74LCX162244GX is a high-performance, low-power, high-speed, low-voltage logic level converter designed for a variety of applications. It belongs to the family of logic buffers, drivers, receivers, and transceivers and supports data rates of up to 500Mbps with typical propagation delays of 7.3ns across the full speed range. This device is well suited for low-power applications due to its low current consumption and has an enhanced signal integrity provided by its low-voltage CMOS technology. Additionally, this device can be used for data bus translation, memory expansion, and signal conditioning.

The specific data is subject to PDF, and the above content is for reference