74LVC126ABQ-Q100X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74LVC126ABQ-Q100X is a low voltage CMOS Logic series device that consists of four voltage translators and five-Hex inverters. This device has such broad applications for digital and analog signal processing as high input impedance, low power, high noise immunity and flexible timing characteristics. The 74LVC126ABQ-Q100X is mainly used in the field of logic buffers, drivers, receivers and transceivers.

Logic Buffers

Logic buffers are the primary application of 74LVC126ABQ-Q100X device. It is an amplifier for transmitting digital signals from one circuit to another, with application in digital signal processing. The buffer can be used to isolate two circuits, or to buffer two or more signal lines that share the same logic output. The 74LVC126ABQ-Q100X can be used to interface between logic families of different supply voltages, or simply to fan-out and drive multiple loads. With its relatively low power dissipation and high noise immunity, it is well suited to buffer logic signals.

Drivers

Drivers are commonly used with high-power or high-current circuits. Such circuits are usually not suitable for direct driving by logic gates because of the high power draw. The 74LVC126ABQ-Q100X can be used to drive these circuits because its output current is higher than most logic gates. It also retains the same low power dissipation and noise immunity features. This makes it an ideal solution for driving high-power or high-current circuits.

Receivers

Receivers are used primarily for receiving digital signals from another circuit. They are usually used in digital signal processing applications. The 74LVC126ABQ-Q100X is ideal for receiving signals from other circuits because of its high noise immunity and low power requirements. It also has considerable flexibility in terms of timing and signal levels, allowing it to be used in a wide variety of signal processing applications.

Transceivers

Transceivers are used to transmit and receive digital signals in two directions. They can be used to interface between two different logic families. Because of their high noise immunity and low power requirements, they are well suited for this application. The 74LVC126ABQ-Q100X is a good solution for this purpose, because it can be used to drive multiple loads, and also retains the features of high noise immunity and low power dissipation.

Working Principle

The 74LVC126ABQ-Q100X is an integrated circuit with five hex inverters and four voltage translators, meaning it contains three separate stages. The first stage is a voltage translator, whose output is connected to the second stage which is a hex inverter. This converts the input signal from a different logic family to the proper logic level for the third stage hex inverters, which then drive the output drivers. The output drivers are designed to meet the desired logic family specifications. Each output is designed with a slew rate limiting circuit and an output enable circuit that allows the output voltage to be gated on or off as desired.

The 74LVC126ABQ-Q100X also has flexible timing characteristics, with a wide range of delay times. This allows the device to be tuned for optimum performance in a particular application. The device is also capable of driving high current loads, such as relays, motors, and solenoids, and is able to operate at a wide range of temperatures (-40°C to +125°C).

In summary, the 74LVC126ABQ-Q100X is a versatile, low-power, low-voltage CMOS logic series device ideal for use as a buffer, driver, receiver, or transceiver. It can be used to drive multiple loads, has excellent noise immunity and is capable of operating over a wide range of temperatures.

The specific data is subject to PDF, and the above content is for reference